IntegratedLibrary_Pnl-LibrariesLibraries_AD

您正在阅读的是 17.1. 版本。关于最新版本,请前往 IntegratedLibrary_Pnl-Libraries((Libraries))_AD 阅读 18.1 版本
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0 and 17.1
 


Use the Libraries panel to access components in libraries currently available in Altium Designer.

Summary

The Libraries panel enables you to browse and place components from the libraries currently available in Altium Designer. The panel has direct access to libraries that are part of an opened project or those installed as persistent libraries.

Panel Access

To display the Libraries panel, click View » Workspace Panels » System » Libraries.

Panels can be configured to be floating in the editor space or docked to sides of the screen. If the Projects panel is currently in the group of docked Workspace panels, use the Projects tab located at the bottom of the panels to bring it to the front.

Content and Use

In Altium Designer, components, footprints and other models can only be used from available libraries, which are those libraries that:

  • Belong to the active project (the project currently selected in the Projects panel).
  • Have been installed in Altium Designer.
  • Are available on a defined search path. Search paths are a project-specific setting – that is, only those defined in the active project can be accessed.

Once libraries have been made available, the contents of one of those libraries is presented in the Libraries panel where is can be browsed and used to place components.

Making Libraries Available

All three of the methods of making a library available are configured in the Available Libraries dialog – click the  button at the top of the panel to open the dialog. The Available Libraries dialog has three tabs, which are described in the following sections. 

Libraries are searched in the order they appear in the Available Libraries dialog – in the order of the tabs, then in the order of the libraries listed within each tab. Searching occurs when the list is interrogated as part of model-link verification, for example, when compiling the project, synchronizing, or running a simulation. Use the Move Up and Move Down buttons in each tab to define the search order of the libraries listed in that tab.

Project Tab

This tab lists all of the libraries that are part of the active project (the project currently selected in the Projects panel).

To add a library to the project, click the Add Library button. The Open dialog will appear in which you can browse to and select a library file that you wish to add to the project.

The following types of library files are supported as project libraries:

  • Integrated Libraries (*.IntLib)
  • Schematic Libraries (*.SchLib)
  • Database Libraries (*.DbLib)
  • Footprint Libraries (*.PcbLib)
  • PCB3D Model Libraries (*.PCB3DLib) – legacy only
  • Sim Model Files (*.Mdl)
  • Sim Subcircuit Files (*.Ckt)
  • SIMetrix Model Libraries (*.LB)

Use the Move Up and Move Down buttons to define the search order of the libraries.

As a new library is added to the list, its corresponding entry also appears under the associated sub-folder in the Projects panel as a document belonging to that project.

Installed Tab

This tab lists all of the installed libraries. This list is an Altium Designer environment setting. Any libraries added to the list will be available for all projects and the list is persistent across design sessions. Project libraries can be added to this list but are not initially part of it.

Click the Install button to run the Open dialog in which you can browse to and select a library that you wish to add to the list.

The following types of library files are supported as installed libraries:

  • Integrated Libraries (*.IntLib)
  • Schematic Libraries (*.SchLib)
  • Footprint Libraries (*.PcbLib)

Use the Move Up and Move Down buttons to define the search order of the libraries.

Search Path Tab

This tab lists all libraries that have been found along the Library Search Paths for the project. These paths are defined in the Search Paths tab of the Options For Project dialog. Clicking the Paths button will take you directly to this tab where you can define further search paths or modify existing ones as required.

Use the Refresh button to update the search paths and ensure that the library list is current.

The following types of library files are supported as search path libraries:

  • Footprint Libraries (*.PcbLib)
  • Sim Model Files (*.Mdl)
  • Sim Subcircuit Files (*.Ckt)
  • PCB3D Model Libraries (*.PCB3DLib) – legacy only

Libraries in this tab are searched in the order they appear. Click the Paths button to define the order.

Search paths can be defined to a specific file or to a folder, including sub-folders. Keep in mind that searching a large number of folders containing a large number of files can be slow. It is also important to remember that making a large number of libraries available when those libraries are accessed over a network can slow the performance of Altium Designer.

Adding Vault Folders to the Libraries Panel

The process of adding Vault folders into the Libraries panel begins in the same way that any library is made available in Altium Designer - by clicking  in the Libraries panel to open the Available Libraries dialog.


Vault folders can be installed like all other Altium Designer libraries, in the Available Libraries dialog.

To install Vault folders into the Libraries panel, ensure the Installed tab of the Available Libraries dialog is the active tab. Click the Install button and select Install from Vault (as shown in the image above) to open the Vault Library dialog.


The Vault Library dialog is used to map Vault folders to the Library name you want displayed in the Libraries panel.

This dialog is used to:

  • Define a name for this 'Vault library' — this is a name that you are giving to a specific set of Vault folders so make it meaningful to you. Enter the name into the Library name field at the top of the dialog. This name only exists in the Libraries panel, i.e., you are not modifying the Vault contents in any way.
  • Define the path to each Vault folder you want included in this 'library' — click the Add button to add each folder you want included in your 'library'. Multiple folders can be added and if you select a parent folder, the components in all child sub-folders will also be included.

Once you have defined a name and added the required folders into the Vault Library dialog, click OK to return to the Available Libraries dialog. The image below shows how the Vault folders present. Note that the Path region of the dialog includes a line for each folder you included in your 'Vault library'.


Vault libraries are listed along with all other installed libraries.

Libraries Panel Sections

The panel is divided into a number of controls and regions.

The Libraries panel is used to locate and place components into your design.
The Libraries panel is used to locate and place components into your design.

Browsing and Placing from the Current Library 

The panel's upper dropdown menu lists the libraries that are available for use with the active project. Select a library in the list to make it the active library in the panel.

Click the dropdown arrow to select a library.
Click the dropdown arrow to select a library.

Depending on the panel's Browse mode setting (see below), the following types of library files may be listed:

  • Schematic Component libraries (*.SchLib, *.Lib)
  • Footprint libraries (*.PcbLib, *.Lib)
  • PCB3D Model libraries (*.PCB3DLib – legacy only)
  • Integrated libraries (*.IntLib)

Setting the Browse Mode for Library Types

The types of libraries shown in the drop-down list will change, depending on the panel browse mode selected. The mode itself is determined using the options accessed by clicking   at the far right of the drop-down field:

Configure what types of libraries should be displayed in the panel.
Configure what types of libraries should be displayed in the panel.

  • Components – enable to display component libraries, including *.SchLib and *.IntLib library types.
  • Footprints – enable to display footprint libraries, including *.PcbLib library types and footprints from IntLib libraries.
  • 3D Models – enable to display *.PCB3D model libraries. Note that 3D models are now incorporated into the footprint in the footprint library.

Any combination of browse modes may be enabled at any given time. The drop-down list will update accordingly. Since integrated libraries can include all types of components/models, separate entries for those libraries will be listed for each browse mode enabled. 

Display of Component Information

When Altium Designer is first installed, the Libraries panel will display Component Name, Description and Library for each component. The columns displayed and the order in which they are displayed can be changed.

To change which columns are displayed, right-click on one of the column headers (or a component name) and choose Select Columns from the context menu, which opens the Select Parameter Columns dialog.


Right-click to configure which columns are displayed.

In the Select Parameter Columns dialog, select the required parameter column and use the Add or Remove buttons to transfer between the Known Parameters and Selected Parameters lists. You can also double-click on an entry to move it from one list to the other. The list of parameters is derived from all parameters across all components in the available libraries.

Use the Select Parameter Columns dialog to add or remove parameters from the Libraries panel.
Use the Select Parameter Columns dialog to add or remove parameters from the Libraries panel. 

The order of parameter columns can be changed using drag and drop, both in the Libraries panel and also in the Select Parameter Columns dialog.

Placing the Selected Component

Once you have located the required component, use one of the following techniques to place the component on the active document:

  • Click the Place button at the top of the panel. 
  • Double-click on the component in the list. 
  • Click and hold the component, then drag and drop the component onto the document

The component will appear, floating on the cursor. While it is floating:

  • Press the Spacebar to rotate the part counterclockwise, in 90° increments. Press Shift+Spacebar to rotate clockwise.
  • Press the X or key to flip the part along the X-axis or Y-axis, respectively.
  • Press Tab to open the component's Properties dialog, which can be edited prior to placement.
  • For a PCB component footprint, press the L key to flip the footprint to the other side of the board.

After placing the component, another will appear on the cursor ready for placement. Continue to place further instances of this component, or right-click (or Esc) to stop placing this component. When using the click-and-drag placement method, only a single instance of the part is placed and the board does not remain in placement mode.

A component can only be placed if there is a suitable document (schematic or PCB) open as the active document and the chosen component has a model for that document kind. 

Vault components can only be placed on a schematic sheet.

Searching for Components

If you know which library contains the component you need, you can simply add that library through the Available Libraries dialog.

Filtering Components in the Current Library

To find a component within the current library, either scroll to find it in the list of components or use the filter field to perform a string search on the component Name field. 

Filter the list of components to quickly locate the required component.
Filter the list of components to quickly locate the required component.

Incremental Search

Incremental search is the name given to searching as you type. To do this in the current library, click on the first entry in the list of components, then start typing the name of the component you want to search for. The list will automatically jump to the component whose name matches the string you are typing. To perform an incremental search on the contents of a different column, drag and drop that column to be the left-most column.

Searching Across Libraries

When you do not know which library contains the component, or if it is even available, you can search for it. To search for a component, click the Search button at the top of the panel, which opens the Libraries Search dialog.

The searching process can be summarized as follows:

  • Searching is performed by defining Filters that are applied to all libraries that can be searched according to the current search Scope setting.
  • The Scope includes the type of libraries to search. Only one type can be searched at a time (Components, Footprints or 3D Models). 
  • The Scope defines which libraries will be searched: either the libraries Altium Designer currently has access to (Available libraries), or all libraries within a folder (Libraries on path).
  • When searching libraries on a path, the target is a specific folder and can also Include Subdirectories.
  • You can also search within the search results by setting the Scope to Refine last search

Use the Libraries Search dialog to search for a component or footprint.
Use the Libraries Search dialog to search for a component or footprint.

Setting the Search Filter

The Filters region is used to define text strings that are to be applied to searching. There are three regions that must be configured:

  1. Field – this is the attribute of the component that is to be searched. It can be any component or footprint attribute including the Name, Description, Comment, Footprint, or any parameter that has been added to a component. 
  2. Operator – defines how a match is determined. This can be when the value equals, contains, starts with, or ends with. Note that equals requires an exact string match so it should only be used when you are confident that the search string is correct and complete.
  3. Value – the characters to be searched for in the chosen Field matched according to the chosen Operator.

If the search Scope is Libraries on path, the Field drop-down will only display previously used strings. If the Scope is Available libraries, then the drop-down will automatically list all attributes of all components in all available libraries. Select the required attribute. 

Setting the Scope

There are essentially two approaches to searching:

  1. Libraries currently available in Altium Designer – that is the list of libraries shown in the drop-down at the top of the Libraries panel.
  2. Libraries stored in a specific folder along with sub-directories if the option is enabled.

Searching will return all items of the chosen search type (Components/Footprints/PCB3D Models) found in all libraries that fall under the defined Scope (Available Libraries/Libraries on the specified search path). For example, if you wanted to find a component that you think is in a library within specific folders on the hard disk and that library was not currently listed in the Available Libraries, you would define the search as follows:

  1. In the Scope region, set Search in to Components and select Libraries on path.
  2. In the Path region, set the Path to point to the folder containing the library document that you want to search.
  3. Click Search.

Advanced Query Searching

In the default mode, the Libraries Search dialog converts the Filters settings to a query, which is then applied to the libraries currently targeted by the Scope. You can see this query, as well as manually enter your own, by clicking Advanced to switch the dialog to the Advanced mode as shown in the image below.

In the Advanced mode, a query of any complexity can be defined. 
In the Advanced mode, a query of any complexity can be defined. 

The top section of the dialog, which is referred to as the Query Editor section, allows you to construct filters through the entry of logical queries. In this mode, you can type a query directly into the field. For help with query keywords, click Helper to open the Query Helper dialog.

Use the Query Helper dialog to locate and learn about query keywords – click in a keyword and press F1 for information about that keyword.
Use the Query Helper dialog to locate and learn about query keywords – click in a keyword and press F1 for information about that keyword.

Notes on using queries and the Query Helper dialog:

  • Use the top section of the dialog to compose a query expression using the available Library Functions and System Functions.
  • The middle reagion of the dialog provides a range of operators for use when constructing an expression.
  • Use Check Syntax to verify that an expression is syntactically correct.
  • When the expression for the query has been defined as required, click OK to load the Query Editor section of the Libraries Search dialog with the query ready to proceed with the search.
  • Use the Clear button in the Libraries Search dialog to clear the current query expression from the Query Editor section of the dialog.

Search Results

Once the search criteria have been defined, click on the Search button to begin the search. The Libraries Search dialog will close and the results of the search will be listed in the Libraries panel under a new entry in the libraries dropdown list titled Query Results as shown in the image below.

Search results are presented in the Libraries panel.
Search results are presented in the Libraries panel.

Note: The Query Results entry will only be displayed if the corresponding browse mode option for the panel is enabled. For example, if the search was conducted for Components, ensure that the Components browse mode option is enabled in order to view the Query Results.
If your search produces no results, check that the Path is correctly specified. Also, try searching for a component that you know is in a library to check that everything is set correctly.

Right-click Menu

The right-click pop-up menu for the panel provides the following commands:

  • Refresh Library – use this command to refresh the contents of the active library in the panel. This can be especially useful when multiple users are working from a shared library over the network.
  • Refresh All - use this command to refresh the contents of all available libraries in the panel. Again, this is useful when multiple users are working from shared libraries.
  • Add or Remove Libraries - use this command to open the Available Libraries dialog in which you can define the list of currently available libraries for the active project.
  • Library Report - use this command to generate a report containing all items in the library currently being browsed in the panel. After launching the command, the Library Report Settings dialog will open. Use the dialog to configure the format and content of the report. You can choose to generate either a print-based Word document (*.doc) or a Browser-based HTML document (*.html). By default, the report will be generated and stored in the same location as the source library using the library's name. For each component in the library, you can specify whether to include parameter, pin and model information. You can also specify whether the report should include images of components and their models (where applicable). The report can be generated in color or monochrome and when generating a report in HTML format, you can determine whether or not images should be saved as metafiles.
  • Place [ComponentName/FootprintName] – use this command to place the currently selected component or footprint onto the active schematic or PCB document, respectively.
  • References – this sub-menu will only appear if the currently selected component has one or more Component Link parameter pairings defined for it. The entries on the menu provide access to various linked documents (e.g.. data sheets, web pages, text documents, etc.).
  • Select Columns – use this command to access the Select Parameter Columns dialog in which you can specify which columns of parameter information are to be displayed for the list region of the panel.
  • Edit Component/Edit Footprint – this command becomes available when either a schematic library (*.SchLib) or Footprint library (*.PcbLib) is being browsed in the panel. Selecting the command opens the source library for the currently selected component/footprint making that component/footprint active in the design editor window and ready for editing.

可用的功能取决于您的 Altium Designer 软件订阅级别

Content