Versions d'évaluation gratuites

Téléchargez une version d'évaluation gratuite pour savoir quel logiciel Altium répond le mieux à vos besoins

Comment acheter

Contactez votre bureau de vente local pour commencer à améliorer votre environnement de conception

Téléchargements

Téléchargez les logiciels de conception de circuits imprimés et EDA les plus récents

  • PCB DESIGN SOFTWARE
  • Altium Designer

    Environnement complet pour le schéma et le routage

  • CircuitStudio

    Outil professionnel pour la conception de circuits imprimés

  • CircuitMaker

    Outil communautaire de conception de circuits imprimés

  • NEXUS

    Outil polyvalent de conception de circuits imprimés destiné aux équipes

  • EMBEDDED
  • TASKING

    La technologie de renommée mondiale pour le développement de systèmes embarqués

  • DATA MANAGEMENT
  • ALTIUM VAULT

    Solution complète de gestion des données de conception

  • Ciiva

    Base de données de pièces intelligente pour une conception réalisable

  • Octopart

    Grande base de données de composants, simple à utiliser

  • EXTENSIONS DE PRODUITS
  • PDN Analyzer

    Analyse de réseau de distribution d'énergie naturelle et sans effort

  • Découvrez toutes les extensions
  • INTEGRATION SERVICES
  • AgileXPLORER

    Recherche et navigation paramétriques des données de produit dans Oracle/ Agile - PLM (gestion du cycle de vie des produits)

  • EDAConnect

    Lien direct entre l'environnement Altium et et le système PLM de l'entreprise

  • TRAININGS
  • Formations en direct

    Apprenez les bonnes pratiques où que vous soyez grâce à notre formation

  • Formations à la demande

    Devenez un expert sans quitter votre maison ou votre bureau

  • Altium Designer 17

    Conception de circuit imprimé Native 3D™ sans stress pour les professionnels

    • Forum

      Là où les utilisateurs et les amateurs d'Altium peuvent interagir

    • Blog

      Notre blog, où nous parlons de ce qui nous intéressent et qui, nous l'espérons, vous intéressent aussi

    • Idées

      Soumettez des idées et votez pour les nouvelles fonctionnalités que vous voulez voir dans les outils Altium

    • Correction de bogues

      Aidez-nous à améliorer le logiciel en signalant les bogues et en votant pour ce que vous trouvez important

    • Mur

      Un flux d'événements sur AltiumLive que vous pouvez suivre en y participant ou vous y abonnant

    • Programme Bêta

      Information sur la participation à notre programme bêta pour obtenir un accès aux outils Altium avant tous les autres

    Toutes les ressources

    Découvrez le contenu le plus récents : billets de blog, médias sociaux et livres blancs techniques rassemblés rien que pour vous

    Téléchargements

    Allez voir les téléchargements disponibles qui répondront le mieux à vos besoins

    Comment acheter

    Contactez votre bureau de vente local pour commencer à améliorer votre environnement de conception

    • Documentation

      The documentation area is where you can find extensive, versioned information about our software online, for free.

    • Formation et événements

      Consultez le calendrier et inscrivez-vous à des formations dans le monde entier et en ligne

    • Contenu de conception

      Parcourez notre importante bibliothèque gratuite de contenus de conception comprenant des composants, des modèles et des conceptions de référence

    • Webinaires

      Assistez à un webinaire en ligne ou obtenez un accès instantané à notre série de webinaires à la demande

    • Assistance

      Obtenez des réponses à vos questions avec nos différentes options d'assistance directe et en libre-service

    • Articles techniques

      Restez au fait des dernières tendances technologiques et de l'industrie avec notre collection de livres blancs techniques.

    Creativity when there is freedom to explore and experiment.

    Forget for one second you have a looming deadline, a list of hackneyed design specifications and pressure from management. Now, imagine you could finally do something different. That you could finally explore all your ideas and that you were encouraged to be creative. Now, imagine you actually worked in this place.

    Sounds like a cliché? Well, if your work environment differs from the description above, then you will envy Bent Christensen, Senior Engineer of Innovation and Prototyping at Bang and Olufsen. He works in the company’s ‘ideas factory’ making prototypes for Bang and Olufsen’s next generation of audio, visual and mobile communications systems.

    The reason they call it the ‘ideas factory’ is because this is where it all starts for most Bang and Olufsen electronic designs.

    “The ‘ideas factory’ is where we have the ideas for future products and where we turn those ideas into prototypes. These prototypes could be for a television, a remote control, or a mobile phone. We design the interface, the electronics and the mechanicals that go in it and then test, analyse and see how the prototype looks, feels, works,” comments Bent.

    The trouble with paradise

    Just like any job, there are particular challenges the designers must face working in the Bang and Olufsen ‘ideas factory’. For Bent, it is dealing with all the options and eventual changes in each prototype. Every time he starts a new prototype, it is like staring at a blank canvas and the real test is to simply find the appropriate architecture for the board.

    “We normally start with one idea, and then change to another because there was something we hadn’t thought of. Then we keep making changes until we get it right. There are so many things that we need to consider when developing our prototypes,” comments Bent.

    You can never solve a problem on the level on which it was created

    They say doing the same thing twice and expecting different results is the definition of insanity. That is why Bang & Olufsen doesn’t just develop a new product; it develops entirely new concepts.

    Anyone familiar with Bang and Olufsen will know that each product is designed to dictate the new fashion in audio equipment. Most people look in awe when they see these beautifully crafted structures. But when an electronics designer looks at the same product, it will be almost certain that they will wonder, ‘how do you design around that case?’

    Bent does deal with unique mechanical casings and this used to be a real challenge. This was until Altium introduced a 3D STEP file import function in Altium Designer. Since upgrading, Bent has saved on development time because he is able to view, in its final form, all his electronics inside its mechanical case.

    “It’s a quick way to design. It helps us to make sure that it fits into the design. It’s just a good way to do it,” comments Bent.

    Using Altium Designer, Bent can also link to his external databases and even draw his footprints onto the schematic. “Integrated libraries make it easy to make your own unique components. You can simply draw the footprint and place it on the schematic as you like it - so that it fits precisely. You can have your own libraries, with your own components, with your own kind of styling. This is important to us. Our products are unique, so our electronics need to be also.”

    This whole process, where components need to be changed and redesigned, design media re-evaluated and trade-offs made, is completed with ease using Altium. The unified design environment means changes made in a single domain will be reflected throughout the entire design. So when the team has to change various materials and designs, they don’t have the usual re-formatting or revision problems that previously impeded development.

    “One example is the touch screen for the Serenata mobile. There were so many changes with this design. We needed to explore so many new ideas. For example, we needed to consider power consumption and battery power. After several prototypes and trial and error, we finally completed the design and made the touch screen out of glass,” comments Bent.

    “We did this entire prototype design on Altium Designer. We were able to try out our ideas and make changes with ease. It also allowed us to work closely with the mechanical team using the real-time MCAD collaboration technology.”

    It’s this combination of features that have seen Bang and Olufen’s ‘ideas factory’ more than halve its development time and double its design throughput. And that’s what today’s design is all about – being able to explore concepts and freely innovate.

    Customer information

    Bang and Olufsen was founded in 1925 and since then has developed a reputation for its range of unique, high-quality audio, video and multimedia products. The company employs over 2,550 people across its offices and retail stores located in over 100 countries.

    Related Stories

    World leading developer of HF radar technology, BAE Systems Australia uses Altium Designer to create cutting-edge signal systems for Australia's unique Over The Horizon surveillance radar.

    Read more

    Bluefin Robotics is seeing a sea change in E-CAD M-CAD design integration with Altium Designer.

    Read more

    Developing rapid prototypes is all in a day’s work for Gryphon Systems Engineering

    Read more
    We are happy to assist you!
    contact us how to buy support
    Сall Sales - United States
    +1 800-544-4186
    +1 800-231-0951
    Not your Region?