Configuring Draftsman Graphic Object Properties in Altium Designer

您正在阅读的是 19.1. 版本。关于最新版本,请前往 Configuring Draftsman Graphic Object Properties in Altium Designer 阅读 21 版本
Applies to Altium Designer versions: 19.1, 20.0, 20.1 and 20.2

Parent page: Graphic

Select a Graphic object in the Draftsman design space to view or edit its property fields in the Properties panel.

Draftsman object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Graphic object properties, or those that can logically be pre-defined, are available as editable default settings on the Draftsman - Defaults page of the Preferences dialog (access from the  button at the top-right of the design space). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Graphic object properties are available for editing in the Properties panel when a placed Graphic is selected in the design space.

The Graphic object default settings in the Preferences dialog and the Graphic mode of the Properties panel The Graphic object default settings in the Preferences dialog and the Graphic mode of the Properties panel

The below properties listing applies to the options available in both the Preferences dialog and the object Properties panel.

Location

  • (X/Y) – the X-axis and Y-axis values of the Graphic container's reference location (bottom-left corner position).
  • Rotation – the rotation angle of the object, i.e. the displayed image. 

Properties

  • Width – the width of the selected Graphic object.
  • Height – the height of the selected Graphic object.
  • Maintain Aspect Ratio – when checked, the X/Y dimensions of the Graphic container will scale in proportion to the aspect ratio of the source image. The source image will always fill the Graphic container.

可用的功能取决于您的 Altium Designer 软件订阅级别