Working with the Layer Pairs Design Rule on a PCB in Altium Designer
Created: 三月 23, 2017 | Updated: 九月 26, 2019
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
您正在阅读的是 18.1. 版本。关于最新版本，请前往 Working with the Layer Pairs Design Rule on a PCB in Altium Designer 阅读 21 版本
Rule category: Manufacturing
Rule classification: Unary
Summary
This rule checks to ensure that the used drill-pairs match the currently defined drill-pairs. The used drill-pairs are determined from the vias and pads found in the board. The permissable drill-pairs are defined in the Drill-Pair Manager dialog.
Constraints
Default constraint for the Layer Pairs rule.
- Enforce layer pairs settings - specifies whether the check is made or not.
How Duplicate Rule Contentions are Resolved
All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.
Rule Application
Online DRC, Batch DRC, and during interactive routing.
