Working with the Length Design Rule on a PCB in Altium Designer

您正在阅读的是 18.1. 版本。关于最新版本,请前往 Working with the Length Design Rule on a PCB in Altium Designer 阅读 21 版本
Applies to Altium Designer versions: 18.0, 18.1, 19.0 and 19.1
 

Rule Category: High Speed

Rule Classification: Unary

Summary

This rule specifies the minimum and maximum lengths of a net.

All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Constraining the Design - Design Rules. For detailed information regarding how to target the objects that you want a design rule to apply to, see Scoping Design Rules.

Constraints

Default constraints for the Length rule.Default constraints for the Length rule.

  • Minimum - the value for the minimum permissible length of the net.
  • Maximum - the value for the maximum permissible length of the net.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

Online DRC and Batch DRC.

可用的功能取决于您的 Altium Designer 软件订阅级别

Content