Working with the Overshoot - Falling Edge Design Rule on a PCB in Altium Designer

您正在阅读的是 15.1. 版本。关于最新版本,请前往 Working with the Overshoot - Falling Edge Design Rule on a PCB in Altium Designer 阅读 21 版本
Applies to Altium Designer version: 15.1
 

Rule category: Signal Integrity

Rule classification: Unary

Summary

This rule specifies the maximum allowable overshoot (ringing below the base value) on the falling edge of the signal.

Constraints

Default constraints for the Overshoot - Falling Edge rule.

Default constraints for the Overshoot - Falling Edge rule.

  • Maximum (Volts) - the value for the maximum permissible overshoot on the falling edge of the signal.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

Batch DRC and during Signal Integrity analysis.

可用的功能取决于您的 Altium Designer 软件订阅级别

Content