Altium Designer Documentation

Working with the Vias Under SMD Design Rule on a PCB in Altium Designer

Created: June 6, 2015 | Updated: November 22, 2016
All Contents

Rule Category: High Speed

Rule Classification: Unary


This rule specifies whether vias can be placed under SMD pads.


Default constraints for the Vias Under SMD rule.

  • Allow Vias under SMD Pads - specifies whether vias can be placed under the pads of surface mount components. (Default = disabled).

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

Online DRC, Batch DRC, and during interactive routing and autorouting.

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.



We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: