Altium Designer Documentation

Layer Stack Table

Modified by Tania Mashkoory on Oct 9, 2018
此文档页面引用了不再受支持的产品 Altium Vault, Altium Vault 及其组件管理功能已迁移到 Altium Concord Pro
All Contents

Parent page: PCB Objects

A Layer Stack Table can be placed on a PCB document alongside the design itself. It provides a detailed summary of the board layer stackups and how the layer groups are assigned.


A Layer Stack Table is a tabular graphic object that documents the layers, materials, thicknesses, and dielectric constants implemented in the current PCB design. It is placed and positioned alongside the board design in the workspace and also includes a graphical key and option map that shows the layer stack used in each region of the board. A Layer Stack Table is an important documentation asset for designs with a complex layer stack structure, such as a rigid-flex design.

The Layer Stack Table is an intelligent design object, meaning it can be placed and updated as the design progresses in the Layer Stack Table mode of the Properties panel.


The Layer Stack Table is available in the PCB editor when the workspace view is set to normal 2D mode (shortcut 2). It is available for placement in the following ways:

  • Choose Place » Layer Stack Table​ from the main menus.
  • Right-click in the workspace then choose Place » Layer Stack Table from the context menu.


Before accessing the placement command, switch to the board layer you would like the table placed on – usually, a mechanical layer. This can be changed later.

After launching the command, the cursor will change to a cross-hair and you will enter Layer Stack Table placement mode. Placement is made by performing the following sequence of actions:

  1. Click to place the table.
  2. The editor remains in Layer Stack Table placement mode, ready to place another table if required. If not, right-click or press Esc to exit placement mode.
Note the Board Map that appears below the table. This is an outline of the board showing how the various layer stacks are assigned to regions of the board. The Board Map can be disabled or scaled by using the Show Board Map option in the Layer Stack Table mode of the Properties panel.

Additional actions that can be performed during placement while the layer stack table is still floating on the cursor and before the center point of the layer stack table is anchored are:

  • Press the Tab key to pause the placement and access the Layer Stack Table mode of the Properties panel from where its properties can be changed on-the-fly. Click the workspace pause button overlay () to resume placement.
  • Press the Alt key to constrain the direction of movement to the horizontal or vertical axis, depending on the initial direction of movement. 
  • Press the Spacebar to rotate the layer stack table counterclockwise or Shift+Spacebar for clockwise rotation. Rotation is in increments of 90°.
While attributes can be modified during placement (Tab to access the Properties panel), keep in mind that these will become the default settings for further placement unless the Permanent option on the  PCB Editor - Defaults page of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.

Graphical Editing

To move a Layer Stack Table, click, hold and drag the table to the desired location. 

Select and drag to reposition a Layer Stack Table.

To remove a Layer Stack Table, select it then press the Delete key.  

If attempting to graphically modify an object that has its Locked property enabled, a dialog will appear asking for confirmation to proceed with the edit. If the Protect Locked Objects option is enabled on the Schematic – Graphical Editing page of the Preferences dialog, and the Locked option for that design object is enabled as well, then that object cannot be selected or graphically edited. Click the locked object to select it then disable the Locked property in the List panel or disable the Protect Locked Objects option to graphically edit the object.

Non-Graphical Editing

The following methods of non-graphical editing are available:

The table size is automatically scaled to fit the included text; reducing the font size (Text Height) will shrink the table to match.

Editing Via the Properties Panel

Properties page: Layer Stack Table Properties

This method of editing uses the associated Properties panel mode to modify the properties of a layer stack table object.

The Layer Stack Table mode of the Properties panel

During placement, the panel can be accessed by pressing the Tab key.

To access the properties of a placed layer stack table:

  • Double-click anywhere on the layer stack table object.
  • Right-click on the layer stack table then select Properties from the context menu.
  • If the Properties panel is already active, click anywhere on the layer stack table object to select it.
Press Ctrl+Q to toggle the units of measurement currently used in the panel between metric (mm) and imperial (mil). This only affects the display of measurements in the panel, it does not change the measurement unit specified for the board - this is configured in the Units setting in the Properties panel when there are no objects selected in the editing workspace.

Editing Multiple objects

The Properties panel supports editing multiple objects, where the property settings that are identical in all currently selected objects may be modified. When multiples of the same object type are selected manually, via the Find Similar Objects dialog or through a Filter or List panel, a Properties panel field entry that is not shown as an asterisk (*) may be edited for all selected objects.

Via the PCB List Panel

The PCB List panel allows you to display design objects from one or more documents in tabular format, enabling quick inspection and modification of object attributes. When used in conjunction with the Filter panel, it enables the display of just those objects falling under the scope of the active filter – allowing you to target and edit multiple design objects with greater accuracy and efficiency. 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.



You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

Copyright © 2019 Altium Limited


点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。





您为何想要试用Altium Designer?

Copyright © 2019 Altium Limited



Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.


好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。






Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。