Configuring PCB Center Dimension Object Properties in Altium Designer

您正在阅读的是 19.1. 版本。关于最新版本,请前往 Configuring PCB Center Dimension Object Properties in Altium Designer 阅读 21 版本
Applies to Altium Designer version: 19.1

Parent page: Center Dimension

PCB Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Center Dimension object properties, or those that can logically be pre-defined, are available as editable default settings on the PCB Editor - Defaults page of the Preferences dialog (accessed from the  button at the top-right of the workspace). Select Center Dimension in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Center Dimension object properties are available for editing in the Properties panel when a placed Center Dimension is selected in the workspace.

The Center Dimension default settings in the Preferences dialog and the Center Dimension mode of the Properties panel       The Center Dimension default settings in the Preferences dialog and the Center Dimension mode of the Properties panel

In the below Properties listing, options that are not available as default settings in the Preferences dialog are noted as "Properties panel only." 

Properties

  • Layer - the layer to which the dimension is currently assigned. Dimensions can be assigned to any available layer. Use the drop-down to select a different layer.
  • Rotation (Properties panel only) - the angle of alignment of the dimension, measured counterclockwise in degrees from the horizontal.
  •  Size -  the current length of the dimension's crosshair lines (or the diameter of the encompassing circle). 

 

可用的功能取决于您的 Altium Designer 软件订阅级别