Dlg-ImportMCADBaselineImport MCAD Baseline_AD

您正在阅读的是 3.1. 版本。关于最新版本,请前往 Dlg-ImportMCADBaseline((Import MCAD Baseline))_AD 阅读 5 版本
Applies to NEXUS Client versions: 2.0, 2.1, 3.0, 3.1 and 3.2

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Import MCAD Baseline dialog
The Import MCAD Baseline dialog

Summary

The Import MCAD Baseline dialog is used to Import an IDX file (MCAD Baseline.idx). This file type is used for collaborating between ECAD and MCAD domains. Altium NEXUS facilitates this collaboration using the Mechanical CAD Collaboration extension, which is necessary to access this dialog.

Access

From the PCB Editor, click File » Import » MCAD IDX Baseline from the main menus.

The Mechanical CAD Collaboration extension (shown below) must be installed to access this dialog.

The extension can be found on the Purchased tab of the Extensions & Updates page (accessed by using the  drop-down at the top-right of the workspace then choosing Extensions and Updates).

Options/Controls

  • Input MCAD Baseline File - click  to browse for and select the desired IDX file to be imported.
  • Output PCB File - click  to browse for and select the desired PCB file into which proposed changes are to be synchronized.
Once the MCAD Baseline IDX file has been imported, collaboration proceeds through the Mechanical CAD Collaboration panel. For more information, see IDX Support.