Altium NEXUS Documentation

Working with the Routing Priority Design Rule on a PCB in Altium NEXUS

Created: March 22, 2017 | Updated: September 26, 2019
您正在阅读的是1.1版本。 关于最新版本,请前往阅读5版本
All Contents

Rule category: Routing

Rule classification: Unary

Summary

This rule assigns a routing priority to the net(s) targeted by the rule. The Autorouter uses the assigned priority value to gauge the routing importance of each net in the design and hence determine which nets should be routed first.

All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Defining, Scoping & Managing PCB Design Rules.

Constraints

Default constraint for the Routing Priority rule.Default constraint for the Routing Priority rule.

  • Routing Priority - the priority value assigned to the net(s) targeted by the scope (full query) of the rule. Enter a value between 0 and 100, whereby the higher the number assigned, the greater the priority when routing.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

During autorouting.

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: