KB: "Failed to get default model link from template" when creating a component

Solution Details

Understanding the Error Message

The error message appears during component creation and indicates that the template cannot retrieve the default model link. This prevents the component from being generated correctly.

The message "failed to get default model link from template" indicates that that symbols/models - which are predefined within this template - are not found. The original model might have gotten deleted, replaced or moved to a new location.

Why the Template Cannot Find Models

The issue occurs because the template references schematic symbols or PCB footprints that are missing or have been relocated. These models are stored in the Models folder, and if they are unavailable, the link fails.

Options to Resolve Missing Model Links

• Check the component template for missing or invalid model links.
• Reassign the correct schematic symbol and PCB footprint.
• Remove outdated links if necessary.

Step-by-Step Instructions

1. Edit the Component Template
   • In the Explorer Panel:
     Navigate to Managed Content » Templates » Component Templates, then right-click the template and select Edit….
2. Locate the Default Model Link
   • In the template editor, find the Default Value cell that contains the symbol or footprint revision ID.
3. Update or Remove the Link
   • Click the three dots next to the cell to open the Explorer Panel and assign the correct models.
   • Alternatively, press Delete to clear the cell content.
4. Save Changes
   • Save the updated component template back to the server.

Further Reading

• Building & Maintaining Your Components and Libraries
• Component Templates