Board Assembly View Properties

Modified by Rob Evans on May 22, 2018

Parent page: Board Assembly View

Draftsman object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Board Assembly View object properties, or those that can logically be pre-defined, are available as editable default settings on the Draftsman - Defaults page of the Preferences dialog (access from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Board Assembly View object properties are available for editing in the Properties panel when a placed Assembly View is selected in the workspace.

     The Assembly View default settings in the Preferences dialog and the Board Assembly View mode of the Properties panel (when a component is selected in the Assembly View).

In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as 'Properties panel only'.

Scale

  • Scale – select the drop-down to choose from a range of preset scale ratios to set the visible size of the object. This option is not available if the Use Custom Scale option is checked.
  • Use Custom Scale – select this option to enter a specific scale in its associated field. The scaling of the drawing object is relative to 1, where 0.9 would represent a scale of 90%.

Title

  • Title – the title name string that will be displayed (if enabled) with the Assembly View object. Use the associated button to toggle its visibility. Enter the title name and any desired system/custom parameters to create a meaningful name for the placed view. See the Parameters section in the panel's Document Options mode for a list of the currently available parameters.
  • Location – select the drop-down to choose from a range of relative locations for the title. The Manual option is automatically selected if the title is manually moved (dragged and dropped to a new location).
  • Font – sets the displayed font used for the view's title string.
    • Use Document Font checkbox selected – the title font used is that defined by the document options. See the Document Font entry in General section of the Properties panel when in Document Options mode.
    • Use Document Font not selected – use the drop-down menus to choose the desired font type and size and select the lower buttons to enable text attributes. The associated color button () opens the color selector where the font color can be specified by RGB or HEX value, by freeform selection, or from a range of presets. Note that the slider control sets the color Opacity level, where 0% represents full transparency.

Style

  • Board Line – the thickness and style of the Assembly View's border/outline. Use the line weight drop-down menu to choose from a range of line thickness presets and the line pattern menu to choose from a range of line styles. The associated color button () opens the line color selector where the font color can be specified by RGB or HEX value, by freeform selection, or from a range of presets. Note that the slider control sets the color Opacity level, where 0% represents full transparency.
  • Component Line – the line thickness and style used to render the component geometry in the Assembly View. Use the line weight drop-down menu to choose from a range of line thickness presets and the line pattern menu to choose from a range of line styles. The associated color button () opens the line color selector where the font color can be specified by RGB or HEX value, by freeform selection, or from a range of presets. Note that the slider control sets the color Opacity level, where 0% represents full transparency.
  • Font – the font style used to notate the view's board components (designator, BOM entry etc). Use the drop-down menu to choose the desired font type and select the lower buttons enable text attributes.
    • Use Document Font checkbox selected – the title font used is that defined by the document options. See the Document Font entry in General section of the Properties panel when in Document Options mode.
    • Use Document Font not selected – use the drop-down menus to choose the desired font type and size and select the lower buttons to enable text attributes. The associated color button () opens the color selector where the font color can be specified by RGB or HEX value, by freeform selection, or from a range of presets. Note that the slider control sets the color Opacity level, where 0% represents full transparency.
  • Font Size (Min/Max) – the minimum and maximum font size that can be automatically applied to a component when its Component Designator property (see below) is set to Center/Fit, where designators are auto-scaled to fit in to the component outline.

Properties

  • View Side – the direction of view used to render the board drawing. Use the drop-down menu to select from a range of preset view directions.
  • Rotation – the angle of rotation used to render the board drawing, as applied by the drop-down menu.
  • Display holes – use the drop-menu to set which board (through) holes will be shown.
  • Minimum Diameter – sets the smallest board hole size that is shown when the Minimum diameter only option is selected for Display Holes.
  • Variation (Properties panel only) – select a project PCB Variant (if available) as the data source for the Assembly View. The Document:xx option is a Variant specified for the document under Document Options in the Properties panel (Source section).
    In the placed Assembly View, omitted variant components are not shown or are indicated as a colored mesh as determined by the Variants Display and Pattern settings (under General) in the Properties panel's Document Options mode. See Design Variants for an overview on managing board design variations.
  • Component Caption – set the parameter source for the text captions associated with components (Designator or BOM Item Position) from the drop-down menu. Check the Show Silkscreen option to enable the appropriate silkscreen overlay on the drawing (Top or Bottom overlay, depending on View Side setting). Note that component graphics on the Silkscreen layer are not shown and silkscreen sourced designators will only be shown if a component's Designator Location is set to Silkscreen.

 Show Pads

  • SMD and Through-Hole checkboxes – check these options for their respective pads shapes to be rendered in the Assembly View. Select their associated color button () to specify the pad display color.
  • Components (Properties panel only) – click to open the Component Display Properties dialog where the display configuration for all components is available.

Component Display Properties

The settings in this section affect all components on the Assembly View unless a specific component is selected in the workspace, where the settings will apply to the selected component. The available property fields are equivalent to those available in the Component Display Properties dialog (when its Show option is set to Components).

  • Component (Properties panel only) identifies the currently selected component (Designator and Name), or indicates All components when the overall Assembly View is selected.
  • Component Body – enable the check box to display component bodies in the Assembly View, and use the drop-down menu to select the data source used for rendering the component graphic. The range of options match those available under the Geometry tab of the Component Display Properties dialog. The associated button is used to specify the component outline color through the color selector pop-up window.
  • Designator - sets the Designator parameter position relative to the component graphic. Use the drop-down menu to choose from a range of positions (which match those available in the Component Display Properties dialog). Toggle the checkbox to enable/disable the designator's visibility. The Manual option is automatically selected if the component's Designator is manually moved (dragged and dropped to a new location).
    ► Designator move example
  • Reference Marker – enable the component reference marker graphic (generally a dot at pin 1) by selecting Inside contour from the drop-down menu.
  • Hatching Pattern  displays and sets the component graphic fill pattern and color, which is used to render the component's profile when displayed in a board Section View. Select the associated button to access the fill options.
    • Pattern – the graphic pattern for the component profile fill. Select Solid fill or an ANSI pattern from the drop-down menu, and use the associated color buttons () to specify colors for the fill and/or hatch pattern. Select a no-fill preset or an opacity level of 0% to set the color as transparent.
    • Scale – the relative line spacing of the applied ANSI hatch pattern.
    • Rotation – the angle of the ANSI hatching lines, where a value of 0 is equivalent to 45°.
    • Hatch Thickness – the line weight of the ANSI pattern lines.
  • Designator Font Size set the font size used for the selected component's designator. This field becomes available when the Use Document Font option in the panel's Style section is unchecked – note the font size is automatically scaled if the component designator positioning is set to Center/Fit (the default).
    • Apply changes to all instances of same BOM item – check this option to apply a change in the designator Location and Font size to all board components of the same type (those that share the same BOM entry). This is equivalent to locating and changing the properties of that component's BOM entry in the Component Display Properties dialog.
      ► Apply to all instances example
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

You are reporting an issue with the following selected text
and/or image within the active document:
ALTIUM DESIGNER FREE TRIAL
Altium Designer Free Trial
Let’s get started. First off, are you or your organization already using Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

In that case, why do you need an evaluation license?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You actually don’t need an evaluation license for that.

Click the button below to download the latest Altium Designer installer.

Download Altium Designer Installer

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Please fill out the form below to get a quote for a new seat of Altium Designer.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

If you are on Altium Subscription, you don’t need an evaluation license.

If you are not an active Altium Subscription member, please fill out the form below to get your free trial.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Why are you looking to evaluate Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

You came to the right place! Please fill out the form below to get your free trial started.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Sounds exciting! Did you know we offer special discounted student licenses? For more information, click here.

In the meantime, feel free to request a free trial by filling out the form below.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

That’s great! Making things is awesome. We have the perfect program for you.

Upverter is a free community-driven platform designed specifically to meet the needs of makers like you.

Click here to give it a try!

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.