MoveSelectedObjectsByIncrement

Modified by Jason Howie on Aug 4, 2017

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Direction=Up|BigSteps=False

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) upwards in the current document workspace, in increments of one snap grid unit.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the required objects selected, simply use the Ctrl+Up Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved upward in the workspace by one snap grid unit.

Use the command repeatedly to move the selection further upward.

Tips

  1. One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.


Applied Parameters: Direction=Down|BigSteps=False

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) downwards in the current document workspace, in increments of one snap grid unit.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the required objects selected, simply use the Ctrl+Down Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved downward in the workspace by one snap grid unit.

Use the command repeatedly to move the selection further downward.

Tips

  1. One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.


Applied Parameters: Direction=Left|BigSteps=False

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) to the left in the current document workspace, in increments of one snap grid unit.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the required objects selected, simply use the Ctrl+Left Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved to the left in the workspace by one snap grid unit.

Use the command repeatedly to move the selection further to the left.

Tips

  1. One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.


Applied Parameters: Direction=Right|BigSteps=False

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) to the right in the current document workspace, in increments of one snap grid unit.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the required objects selected, simply use the Ctrl+Right Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved to the right in the workspace by one snap grid unit.

Use the command repeatedly to move the selection further to the right.

Tips

  1. One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.


Applied Parameters: Direction=Up|BigSteps=True

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) upwards in the current document workspace, in increments of ten snap grid units.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the required objects selected, simply use the Shift+Ctrl+Up Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved upward in the workspace by ten snap grid units.

Use the command repeatedly to move the selection further upward.

Tips

  1. One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.


Applied Parameters: Direction=Down|BigSteps=True

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) downwards in the current document workspace, in increments of ten snap grid units.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the required objects selected, simply use the Shift+Ctrl+Down Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved downward in the workspace by ten snap grid units.

Use the command repeatedly to move the selection further downward.

Tips

  1. One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.


Applied Parameters: Direction=Left|BigSteps=True

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) to the left in the current document workspace, in increments of ten snap grid units.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the required objects selected, simply use the Shift+Ctrl+Left Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved to the left in the workspace by ten snap grid units.

Use the command repeatedly to move the selection further to the left.

Tips

  1. One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.


Applied Parameters: Direction=Right|BigSteps=True

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) to the right in the current document workspace, in increments of ten snap grid units.

Access

This command is accessed from the Schematic Editor, and Schematic Library Editor. With the required objects selected, simply use the Shift+Ctrl+Right Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved to the right in the workspace by ten snap grid units.

Use the command repeatedly to move the selection further to the right.

Tips

  1. One snap grid unit is defined as being the value specified in the Grid field, in the General section of the Properties panel - which shows the options for the active schematic document when no objects are currently selected in the design workspace.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

You are reporting an issue with the following selected text
and/or image within the active document:
ALTIUM DESIGNER FREE TRIAL
Altium Designer Free Trial
Let’s get started. First off, are you or your organization already using Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © Altium Limited

In that case, why do you need an evaluation license?

If would like to speak with a representative, please contact your local Altium office.
Copyright © Altium Limited

Got it. You actually don’t need an evaluation license for that.

Click the button below to download the latest Altium Designer installer.


Download Altium Designer Installer

If would like to speak with a representative, please contact your local Altium office.
Copyright © Altium Limited

Please fill out the form below to get a quote for a new seat of Altium Designer.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

If you are on Altium Subscription, you don’t need an evaluation license.

If you are not an active Altium Subscription member, please fill out the form below to get your free trial.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Why are you looking to evaluate Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © Altium Limited

You came to the right place! Please fill out the form below to get your free trial started.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Sounds exciting! Did you know we offer special discounted student licenses? For more information, click here.

In the meantime, feel free to request a free trial by filling out the form below.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

That’s great! Making things is awesome. We have the perfect program for you.

Upverter is a free community-driven platform designed specifically to meet the needs of makers like you.

Click here to give it a try!

If would like to speak with a representative, please contact your local Altium office.
Copyright © Altium Limited

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.