A Circle is a graphic object that can be placed on a Draftsman document sheet and optionally filled with a solid color or ANSI pattern.
Circles are available for placement in the Draftsman Editor as follows:
Choose the Place»Circle command from the main menus.
Click the button in the graphic objects drop-down on the Active Bar located at the top of the design space. Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the topmost item on that section of the Active Bar.
Right-click in the drawing design space then select Place » Circle from the context menu.
Click the the entry in the graphic objects drop-down menu () on the Drawing Annotations toolbar (View » Toolbars » Drawing Annotations to enable).
After launching the command, the cursor will change to a cross-hair and the editor will enter circle placement mode. Placement is made by performing the following actions:
Click to define the center position of the circle.
Move the cursor to adjust the radius of the circle then click again to complete placement.
Continue placing further circles, or right-click or press Esc to exit the placement mode.
The non-graphical method of editing a Circle is available in the Draftsman Properties panel, which provides editable property fields for the item that is currently selected in the design space.
The Properties panel when a Circle object is selected.
To open the Properties panel and access the properties of a placed Circle:
After selecting the Circle object, select the Properties panel from the Panels button at the bottom right of the design space or select View » Panels » Properties from the main menus.
Double-click on the Circle's perimeter.
Right-click on the Circle perimeter then select Item Properties from the context menu.
If the Properties panel is already active, click on the Circle's perimeter to access its properties in the panel.
The Circle properties can be accessed prior to entering placement mode from the Draftsman - Defaults page of the Preferences dialog. This allows the default properties for the Circle object to be changed, which will be applied when placing subsequent Circles.
Editing Multiple Objects
The Properties panel supports multiple object editing, where the property settings that are identical in all currently selected objects can be modified.