Parent article: System Installation, Licensing & Management
Installation of Altium Designer is both intuitive and fast, courtesy of the Altium Designer Installer. This wizard-based installer streamlines the initial installation process, while letting you choose the initial 'flavor' of the installation, in terms of installed functionality.
This article takes a look at the procedure for installing Altium Designer on a computer.
To access the Altium Designer Installer, you need to first download and run a small (approx. 20MB) executable –
AltiumDesignerSetup<Version>.exe. This executable is downloaded from the Downloads page of the Altium website, and can be saved anywhere on your hard disk.
Running the Installer
AltiumDesignerSetup<Version>.exe file. The Altium Designer Installer welcome page will appear.
Initial welcome page for the Altium Designer Installer.
The installer itself is wizard-based, providing a set of progressive (and intuitive) pages that collectively gather the information to effectively install the version of the software, and its initial feature set, as you require.
Click Next to continue. The following sections provide a summary of the various pages you will encounter.
This page of the Installer presents you with the Altium End-User License Agreement (EULA).
Read and accept Altium's End-User License Agreement.
Before you can continue with the installation of the software, you must read through, and accept, the terms of this agreement. The agreement can be viewed in different languages, including English (the default), German, Chinese and Japanese.
Clicking the Advanced button will access an Advanced Settings pop-up window. From here, you are able to specify proxy-settings, if applicable. Click OK to effect any changes and return to the License Agreement page.
Specify the use of basic authentication using proxy settings, as part of advanced options for the install.
With the EULA read, continue with the install by checking the I accept the agreement box and clicking the Next button.
If you already have Altium Designer installed, and are running the installer for a subsequent point release within the same version stream (e.g. installing Altium Designer 18.1.x, and Altium Designer 18.1.x-1 is already installed), an additional page of the Altium Designer Installer wizard will be available - Installation Mode. This page gives you the choice of either updating an existing version instance of Altium Designer, or installing as a separate new version instance. Choose the New installation option to maintain separate version instances of the software on the same computer. Alternatively, choose the Update existing version option, then use the drop-down field to select the specific instance of the software you wish to update.
If you already have a previous installation of Altium Designer within the same version stream, you can choose to update that version.
Or, simply install as a separate unique instance.
With your choice of installation mode made, click Next to proceed.
You will now be presented with an Account Log In pop-up window. This simply means logging in to your Altium Account – to which your valid license is associated – using your AltiumLive Credentials. The reason for this is two-fold:
- Firstly, it verifies your identity and that installation of the software is valid, as determined by your account and licensing.
- Secondly, it provides secure access to the Altium Cloud Repository in which the installation files reside – the files that are required to be downloaded before the software can be ultimately installed on the PC.
Log in to your account using your AltiumLive Credentials.
Select Design Functionality
This next page of the Installer allows you to specify which features are installed initially. The
PCB Design option provides the base software and core technologies required to perform PCB design. It is always installed and cannot be deselected. Use the remaining options to tailor the install to suit your needs. This will also have an impact on the initial installation time too!
What initial functionality would you like in your installation of Altium Designer? - The choice is yours!
Simply click to enable the functionality you require. As you select and deselect functionality, text at the bottom of the page dynamically updates to reflect the size of the download involved and how this translates to required disk space, once those downloaded files are installed.
Remember, no matter what decision you take at initial install, you can add or remove features and functionality at any stage after installation. This puts you in the driving seat as it were, to fully customize your installation in-line with your, possibly ever-changing, design needs.
After defining what functionality you'd like, click Next to proceed.
This next page of the Installer allows you to specify the destination folders for the install, in terms of both the Program Files for the software and the Shared Documents that are accessed and used by the software.
Specify where the software and associated documents are to be installed.
These locations become especially important when installing multiple instances of Altium Designer. If one or both of these destinations is not currently an empty folder (i.e. devoid of content) you will be prevented from proceeding with the installation until you specify alternate (and empty) destination(s).
The default destinations (Windows 7 and above) are:
To specify alternate locations, simply type the location directly into the applicable field, or click the folder icon at the right of a field and browse for the required destination folder.
Once the install locations are specified, click Next to continue.
Ready To Install
The Installer now has all the information it requires to proceed with the installation. If you need to change anything, click the Back button. If you want to cancel out of the install, click Cancel.
Ready to begin the install!
To go ahead and proceed with the installation, click Next.
Installing Altium Designer
The page will change from Ready to Install to Installing Altium Designer and the installation will proceed, with the required files first being downloaded (from the secure cloud-based repository). Progress of this download is displayed within the Installer itself.
Installation commences by downloading the required set of install files.
Once the download of files is complete, they will be installed, again with progress displayed in the Installer.
After the download is complete, the software is then installed.
When the installation itself completes, you have reached the end of the Installer wizard.
That's it, installation is complete!
An option is provided to launch Altium Designer when you exit the Installer, enabled by default. Simply click Finish to exit the wizard.
That's it. You have installed Altium Designer on your computer, and initially tailored its functionality to suit your design needs. Now it's time to do what you do best and go create that next innovative (and hopefully lucrative) product!
Importing Preferences from a Previous Version or Major Release
After installing and launching your new version of Altium Designer, the Import Settings dialog will appear, from where you are given the opportunity to import preferences from the most recent previous installation at startup.
Import settings from your previous version's installation.
Not only will the preferences be imported, but the user settings will be copied across too - ensuring the new version opens with the same look and feel created in the previous version, even down to the last opened workspace and panel positioning!
If the option to import preferences on initial startup is not taken, don't worry – preferences can be quickly imported, at any time, from within the Preferences dialog. Simply click the button, at the bottom of the dialog. The associated menu will list all previous versions/releases currently installed on the computer, and that can be imported from.
Altium Product Improvement Program
As part of working with Altium Designer, you have the ability to participate in Altium's Product Improvement Program. This program helps Altium to improve Altium Designer moving forward, by better understanding user behavior and environments. You can commence participation at any time. Conversely, if you initially start participating, but later would prefer not to, you are free to stop participation in the program at any time. The option to participate, or not, is available from the System - Product Improvement page of the Preferences dialog. Alternatively, you can enable/disable participation using the Product Improvement option, on the System - Network Activity page of the Preferences dialog.
Help make Altium Designer even better, by participating in the Product Improvement Program.
Similar programs are now standard in the software development industry by companies such as Microsoft®, Google®, Apple®, etc. It is likely that you already share your usage experience with any number of companies. Your participation in this program will give Altium the ability to fine tune our products for your specific environment, identify issues you face during your everyday work, and to improve Altium Designer to fit your needs.
Some examples of statistical information we collect includes, but is not limited to:
- Number of outjob files in projects.
- Number of pins in a typical board.
- Types of installed libraries.
- Most frequently used commands.
- Duration of full project compilation.
- Load times for files.
A few examples of hardware information we collect includes, but is not limited to:
- Number of CPUs and monitors.
- Screen resolution.
- OS platform and version.
Information about your computer hardware, and how you use Altium Designer, will be sent periodically to Altium's servers for analysis.
The following are just some of the ways in which information, obtained and assessed through user participation in the program, will be used:
- Identify the most popular features so that focus can be given to their improvement.
- Optimize UI for more commonly used hardware.
- Locate performance obstacles in the software.
- Ensure productivity features are being used.
- Retire unused features.
For information on how to manage your instance of Altium Designer after initial installation, use the following links: