Altium Designer Documentation

Query_Lang-PCBFunctions_Fields_ArcStartAngleArcStartAngle_AD

Created: September 7, 2015 | Updated: August 11, 2021

Parent page: PCB Query Functions - Fields

Summary

Returns all arc objects whose Start Angle property complies with the Query.

Syntax

ArcStartAngle : Number

The number returned specifies the Start Angle in units of degrees.

Example Usage

ArcStartAngle = 30.0
Returns all arc objects that have a Start Angle property which is 30.0 degrees.

ArcStartAngle > 60.0
Returns all arc objects that have a Start Angle property which is greater than 60.0 degrees.

ArcStartAngle Between 30.0 And 150.0
Returns all arc objects that have a Start Angle property which is greater than, or equal to, 30.0 degrees and less than, or equal to, 150.0 degrees.

ArcStartAngle <= 45.0
Returns all arc objects that have a Start Angle property which is less than, or equal to, 45.0 degrees.

ArcStartAngle Between 315 And 360 || ArcStartAngle Between 0 And 45
Returns all arc objects that have a Start Angle property which is between 315 degrees and 45 degrees.

Tips

  1. The Start Angle property is only defined for arc objects.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: