CoordinateDimensionSize

Now reading version 18.1. For the latest, read: CoordinateDimensionSize for version 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: PCB Query Functions - Fields

Summary

Returns coordinate, center dimension, leader dimension, and original dimension objects whose Size (Coord/Dimen) property complies with the Query.

Syntax

CoordinateDimensionSize : Number

Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).

A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:

  • AsMils(CoordinateDimensionSize) : Number – to specify a size in mil.
  • AsMM(CoordinateDimensionSize) : Number – to specify a size in mm.

Example Usage

CoordinateDimensionSize = 10
Returns all coordinate, center dimension, leader dimension, and original dimension objects that have a Size (Coord/Dimen) property which is 10 current measurement units.

CoordinateDimensionSize >= 0.2286
Returns all coordinate, center dimension, leader dimension, and original dimension objects that have a Size (Coord/Dimen) property which is greater than or equal to 0.2286 current measurement units.

AsMils(CoordinateDimensionSize) Between 8 And 12
Returns all coordinate, center dimension, leader dimension, and original dimension objects that have a Size (Coord/Dimen) property which is greater than or equal to 8mil and less than or equal to 12mil.

AsMM(CoordinateDimensionSize) < 0.2794
Returns all coordinate, center dimension, leader dimension, and original dimension objects that have a Size (Coord/Dimen) property which is less than 0.2794mm.

Tips

  1. The Size (Coord/Dimen) property is only defined for coordinate, center dimension, leader dimension, and original dimension objects.
  2. The child objects of coordinate, center dimension, leader dimension, and original dimension objects returned by the Query are not returned.

 

Note

The features available depend on your level of Altium Designer Software Subscription.