Pad_CornerRadius_MidLayer20

This document is no longer available beyond version 21. Information can now be found here: Pad_CornerRadius_MidLayerN for version 24

Applies to Altium Designer version: 21

Parent page: PCB Query Functions - Fields

Summary

Returns pad objects whose Pad Corner Radius (%) (Mid Layer 20) property complies with the Query.

Syntax

Pad_CornerRadius_MidLayer20 = CornerRadius_String
Pad_CornerRadius_MidLayer20 <> CornerRadius_String

CornerRadius_String specifies the corner radius, expressed as a percentage.

Example Usage

Pad_CornerRadius_MidLayer20 = '50%'
Returns all pad objects whose Pad Corner Radius (%) (Mid Layer 20) property equals 50%.

Pad_CornerRadius_MidLayer20 <> '30%'
Returns all objects except for pad objects whose Pad Corner Radius (%) (Mid Layer 20) property equals 30%.

Tips

  1. The single quote characters (') at the start and end of CornerRadius_String are mandatory.
  2. For simple pads (with Stack Mode set to Simple) the Pad Corner Radius (%) (Mid Layer 20) property will be the same as the Pad Corner Radius (%) (All Layers) property, since the specified Corner Radius is used for all signal layers.
  3. For Top-Middle-Bottom pads (with Stack Mode set to Top-Middle-Bottom) the Pad Corner Radius (%) (Mid Layer 20) property will be the same as the Pad Corner Radius (%) (Mid Layer 1) property, since the Corner Radius specified for Signal Layer 1 is applied to all internal ('middle') signal layers.
  4. The Pad Corner Radius (%) (Mid Layer 20) property is only defined for pad objects.

 

Note

The features available depend on your level of Altium Designer Software Subscription.