Altium Designer Documentation

Query_Lang-PCBFunctions_Fields_Pad_CornerRadius_MidLayer8Pad_CornerRadius_MidLayer8_AD

Created: September 3, 2015 | Updated: August 11, 2021

Parent page: PCB Query Functions - Fields

Summary

Returns pad objects whose Pad Corner Radius (%) (Mid Layer 8) property complies with the Query.

Syntax

Pad_CornerRadius_MidLayer8 = CornerRadius_String
Pad_CornerRadius_MidLayer8 <> CornerRadius_String

CornerRadius_String specifies the corner radius, expressed as a percentage.

Example Usage

Pad_CornerRadius_MidLayer8 = '50%'
Returns all pad objects whose Pad Corner Radius (%) (Mid Layer 8) property equals 50%.

Pad_CornerRadius_MidLayer8 <> '30%'
Returns all objects except for pad objects whose Pad Corner Radius (%) (Mid Layer 8) property equals 30%.

Tips

  1. The single quote characters (') at the start and end of CornerRadius_String are mandatory.
  2. For simple pads (with Stack Mode set to Simple) the Pad Corner Radius (%) (Mid Layer 8) property will be the same as the Pad Corner Radius (%) (All Layers) property, since the specified Corner Radius is used for all signal layers.
  3. For Top-Middle-Bottom pads (with Stack Mode set to Top-Middle-Bottom) the Pad Corner Radius (%) (Mid Layer 8) property will be the same as the Pad Corner Radius (%) (Mid Layer 1) property, since the Corner Radius specified for Signal Layer 1 is applied to all internal ('middle') signal layers.
  4. The Pad Corner Radius (%) (Mid Layer 8) property is only defined for pad objects.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: