Altium Designer Documentation

Query_Lang-PCBFunctions_Fields_PadYSize_AllLayersPadYSize_AllLayers_AD

Created: September 4, 2015 | Updated: August 18, 2021

Parent page: PCB Query Functions - Fields

Summary

Returns all simple pad objects, whose Y Size (All Layers) property complies with the Query.

Syntax

PadYSize_AllLayers : Number

Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).

A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:

  • AsMils(PadYSize_AllLayers) : Number – to specify a size in mil.
  • AsMM(PadYSize_AllLayers) : Number – to specify a size in mm.

Example Usage

PadYSize_AllLayers = 100
Returns all simple pad objects whose Y Size (All Layers) property is equal to 100 current measurement units.

PadYSize_AllLayers >= 4.064
Returns all simple pad objects whose Y Size (All Layers) property is greater than, or equal to, 4.064 current measurement units.

AsMils(PadYSize_AllLayers) > 80
Returns all simple pad objects whose Y Size (All Layers) property is greater than 80mil.

AsMM(PadYSize_AllLayers) Between 1.524 And 3.81
Returns all simple pad objects whose Y Size (All Layers) property is greater than or equal to 1.524mm and less than or equal to 3.81mm.

PadYSize_AllLayers <> 50
Returns all simple pad objects whose Y Size (All Layers) property is not equal to 50 current measurement units.

Tips

  1. The Y Size (All Layers) property is only defined for pads whose Stack Mode property is set to Simple.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: