Altium Designer Documentation

Query_Lang-PCBFunctions_Fields_RadialDimensionAngularStepRadialDimensionAngularStep_AD

Created: September 9, 2015 | Updated: August 18, 2021

Parent page: PCB Query Functions - Fields

Summary

Returns all radial diameter dimension, and radial dimension objects whose Angular Step property complies with the Query.

Syntax

RadialDimensionAngularStep : Number

The number returned specifies the Angular Step in units of degrees.

Example Usage

RadialDimensionAngularStep = 30.0
Returns all radial diameter dimension, and radial dimension objects that have a Angular Step property which is 30.0 degrees.

RadialDimensionAngularStep > 60.0
Returns all radial diameter dimension, and radial dimension objects that have a Angular Step property which is greater than 60.0 degrees.

RadialDimensionAngularStep Between 30.0 And 150.0
Returns all radial diameter dimension, and radial dimension objects that have a Angular Step property which is greater than, or equal to, 30.0 degrees and less than, or equal to, 150.0 degrees.

RadialDimensionAngularStep <= 45.0
Returns all radial diameter dimension, and radial dimension objects that have a Angular Step property which is less than, or equal to, 45.0 degrees.

Tips

  1. The Angular Step property is only defined for radial diameter dimension, and radial dimension objects.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: