W

This document is no longer available beyond version 21. Information can now be found here: W for version 24

Applies to Altium Designer version: 21

Parent page: PCB Query Functions - Fields

Summary

Returns arc and track objects whose Width property complies with the Query.

Syntax

W : Number

Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).

A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:

  • AsMils(W) : Number – to specify a width in mil.
  • AsMM(W) : Number – to specify a width in mm.

Example Usage

W = 20
Returns all arc and track objects that have a Width property which is 20 current measurement units.

W >= 0.381
Returns all arc and track objects that have a Width property which is greater than or equal to 0.381 current measurement units.

AsMils(W) Between 10 And 30
Returns all arc and track objects that have a Width property which is greater than or equal to 10mil and less than or equal to 30mil.

AsMM(W) < 0.635
Returns all arc and track objects that have a Width property which is less than 0.635mm.

Tips

  1. The Width property is only defined for arc and track objects.
  2. This function is an alias for the Width function.

 

Note

The features available depend on your level of Altium Designer Software Subscription.