CAM Editor - DRC

This document is no longer available beyond version 4. Information can now be found here: CAM Editor - DRC Preferences for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

Parent page: Accessing, Defining & Managing System Preferences

The CAM Editor - DRC page of the Preferences dialogThe CAM Editor - DRC page of the Preferences dialog

Summary

The CAM Editor – DRC page of the Preferences dialog allows you to set the minimum clearance distance between a thermal and another flash on a plane layer within the CAM design space.

Access

This page is part of the main Preferences dialog that is accessed by clicking the  control in the upper-right corner of the design space then selecting the DRC entry under the CAM Editor folder.

Options/Controls

Starved Thermals Clearance

  • Clearance Value - use this field to set the minimum allowable distance between a thermal and another flash on a plane layer. This distance is specified as a percentage value from the thermal outer dimension.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content