Contact our corporate or local offices directly.
Draftsman is an alternative way to create the graphical documents for board design production. Based on a dedicated file format and set of drawing tools, the Draftsman drawing system provides an interactive approach to bringing together fabrication and assembly drawings with custom templates, annotations, dimensions, callouts, and notes.
The Draftsman PCB drawing capabilities are available through an Altium NEXUS Extension application, which is automatically installed with Altium NEXUS. The extension can be manually installed/removed or updated from the Altium NEXUS Extensions & Updates page (select the Extensions and Updates option from the system User menu – ). The Draftsman extension is located within the Installed tab and within the Updates tab when a software update is available.
► See Extending Altium Design Software for more information on installing and managing Altium software Extensions.
The Draftsman drawing application can act as an adjunct, or even an alternative, to the production of graphical-type PCB production documents using traditional outputs. It offers automated placement of assembly and fabrication drawings on demand, and includes a wide range of manual drawing tools that can be used to add important details and highlighting to its multi-page documents.
The tool's key features include:
The Altium Draftsman application creates and saves PCB drawing files (
*.PCBDwf) and uses specific template formats for defining Sheet (page) properties (
*.DwsDot) and Document content (
*.DwfDot). The 'smart' document templates can be configured to automatically populate the document with nominated PCB drawing views and information text. When initially created, Document templates can use current Sheet templates to define the page properties (size, style, margins, etc.).
A new Draftsman document is created in Altium NEXUS using the File » New » Draftsman Document command. The New Document dialog opens.
The dialog allows for the selection of a predefined Document Template (three are provided with the installation) or a Default option that creates a blank A4 document – note that a Sheet Template can be applied once the new document has been created. The button opens the Draftsman - Templates page of the Preferences dialog, where the location of the templates directory is defined.
Along with the desired Draftsman template, a specific Project and board Source Document can be selected where multiple files are open in Altium NEXUS. The new document will be associated with, and therefore draw data from, the nominated project, which will become the active project. The newly created document will be added to the nominated project.
PCB Draftsman files are a multi-sheet format, which allows documents to contain individual pages (sheets) that are assigned to particular types of board project production information. Sheets can be added to and removed from the current document with the Tools » Add Sheet and Tools » Remove Sheet commands (the commands are also available on the right-click context menu).
The currently active sheet number and the total number of sheets in a document are shown in the Status bar at the bottom of the workspace.
The settings for individual pages (sheets) in a Draftsman document can be defined in the Properties panel, under the Page Options tab.
Open the Properties panel from the system button, or select View » Panels » Properties from the main menu. The panel’s Document Options mode is active when no object is selected in the workspace.
The settings under the Page Options tab determine the base structure (size, margins, etc.) of the current page or all pages in the document. Alternatively, the page format can be defined as a custom size, or by loading a sheet Template document.
Changes made to the Page Options properties can be applied to the current page (), or all pages in the document (). For settings that apply to the overall Draftsman document and its constituent pages, see Document Options below.
► See the Properties panel Page Options section for more information.
An Altium Draftsman document can use templates to define its page properties (Sheet template), and for new documents, a range of predetermined content (Document template). Both types of templates can be created from the PCB drawing file (file extension
PCBDwf) that is currently open in the editor by saving the document as one of the template types (
DwfDot). A Template document may be reopened, edited and saved to modify its content and properties.
Sheet (page) templates contain the graphics information for a page, including sheet sizes, parameters, and zones and border settings. Objects created with the editor's graphics tools (such as lines, rectangles, circles, and text) are also included – for example, a constructed Title block and content. A Sheet Template can be used to define the graphic format of a new or existing drawing document, and are also saved as part of a Document Template.
To save the current drawing document format as a Sheet Template, select the File » Save Copy As (or just Save As) command and choose Altium Draftsman Sheet Templates (*.DwsDot) from the save dialog's Save as type selection filter. Any elements that are incompatible with the Sheet Template format will be removed, such as placed drawings or additional pages. Before saving, an alert dialog will detail the pending action if incompatible elements exist.
Note that a saved Sheet Template can be applied to a Draftsman document page from the Properties panel Template section under the Page Options tab – select the option and click the button to locate and load a specific Sheet Template.
To save the current drawing document format as a Document Template, select the File » Save Copy As (or just Save As) command and choose Altium Draftsman Document Templates (*.DwfDot) from the save dialog's Save as type selection filter. All of an existing drawing document's content and attributes, with the exception to those that relate to data extracted from the PCB design, will be saved as a Document Template. If the source drawing document has a specific page style (as might be applied by a Sheet Template) these graphical elements and attributes will be saved with the new Document Template.
Any elements that are incompatible with the Document Template format will be removed. Before saving, an alert dialog will detail the pending action if incompatible elements exist.
A multi-page Draftsman document might typically contain assembly drawings, drill tables and drawings, layer stack and BOM tables, and fabrication drawings. When saved as a Document Template, the data from the current PCB is retained to define a drawing content 'shell'.
When subsequently used as a template for a new drawing document, the project's current PCB data is loaded into the shell in place of the template PCB data, therefore, recreating the document format and its type of content.
Both Sheet and Document templates can be opened as free documents in Altium NEXUS and edited accordingly. Open a template by selecting File » Open and choose Altium Draftsman Sheet Templates (*.DwsDot) or Altium Draftsman Document Templates (*.DwfDot) from the browser filter options.
An open Document Template will include the PCB design data that applied when the template was created, and also the Sheet Template properties that were active when it was created. If a Sheet Template defined the page properties in that Document template, it will need to be reapplied if the Sheet Template has changed in the interim.
The settings for the overall Draftsman document (potentially composed of multiple sheets/pages) are defined in the Properties panel, under the General tab.
If not already active, open the Properties panel from the system button, or select View » Panels » Properties from the main menu. The panel’s Document Options mode is active when no object is selected in the workspace.
The Document Options settings determine the document’s source design data, graphic styling, drawing behavior and the applied units. Changes to the settings override the panel’s default property settings, which are defined by current document template – such as the default template (
► See the Properties panel Document Options Mode section for more information.
The Altium Draftsman application allows a range of automated production drawings to be placed directly onto a Draftsman drawing document.
The type of drawing to be placed is selected from the icons presented in the editor's Active Bar (located at the top of the workspace) or the Drawing Views toolbar. Alternatively, a drawing type can be placed from using main Place menu or by right clicking in the workspace and selecting a Place option from the context menu.
When placed in the document, drawings can be manipulated within the page and their properties edited from a dedicated Draftsman Properties panel. If not already open, the panel can be activated by double-clicking on a placed drawing view, by selecting the drawing view and choosing Properties from the right-click option menu, or by selecting the Properties option from the system menu.
The panel provides editing access to the detailed properties of objects that have been placed in the drawing document. Select an object or view to see its properties in the panel.
A Draftsman Board Assembly View is an automated graphic composite of the active PCB project's board outline, cutouts, holes, and component graphics with additional notation. An Assembly View for the nominated source project PCB is placed in a document by selecting the object icon, or via the Place menu options.
The Board Assembly View's component graphics are automatically generated and take data on a priority basis from several sources, such as:
A component graphic on a nominated board mechanical layer (used as a design assembly layer) – the layers used are specified in the Source section of the Properties panel in Document Options mode.
Note that the automatic generation of a Board Assembly View does not rely on the availability of an additional board assembly layer (for example, Top/Bottom Assembly), so this mode is an option.
A component's visibility, designator attributes and the geometry source options used for forming its graphics can be changed in the Component Display Properties dialog, which is opened from the button in the Draftsman Properties panel. The graphic properties for all components in the Assembly View are available.
Alternatively, when a component is selected on the Assembly Drawing itself, that component's graphic configuration options become available in the Component Display Properties section of the Properties panel.
► See Board Assembly View Properties for information on the property settings available for an Assembly View.
A Draftsman Board Fabrication View is an automated graphic composite of the PCB project's unpopulated (bare) board, as viewed from the Top or Bottom. A Fabrication view for the nominated project PCB is placed in a document by selecting the object in the Active Bar or Drawing Views toolbar, or via the Place menu options.
The drawing data is sourced from a specified physical board layer, and polygon copper fills may be displayed as solid, hatched or as simple outlines. Select a placed Board Fabrication View in the workspace to access its options and visual settings in the Properties panel.
► See Board Fabrication View Properties for information on the property settings available for a Fabrication View.
A Draftsman Drill Drawing View is an automated graphic composite of the active PCB project's board outline and drill holes. The Drill Drawing view for the selected PCB is placed in a drawing document by selecting the object in the Active Bar or Drawing Views toolbar, or via the Place menu options.
The view is rendered with definable symbols that correspond to hole types, and also includes any specified drill layer pairs. Select a placed Drill Drawing View in the workspace to access its options and visual settings in the Properties panel.
► See Drill Drawing View Properties for information on the property settings available for a Drill Drawing View.
The Draftsman Board Detail View feature allows a defined area of a drawing to be brought out to a floating, magnified view of its detail. Board Detail Views may be added all graphical board views, including the Assembly View, Fabrication View, Section View, and Drill Drawing View.
To place a Detailed View, select the Place » Board Detail View command or click the icon on the Active Bar at the top of the workspace. The placement procedure is as follows:
The magnification factor (scale), labeling and line attributes of the detailed view can be configured in the Properties panel when a Board Detail View is selected. Use the panel's Properties options to set how the Detailed View relates to the source area.
► See Board Detail View Properties for information on the property settings available for a Detail View.
A Draftsman Board Section View provides a profile slice, or sectional, drawing taken from a nominated 'cut' point through a placed PCB Assembly View. The section view generator takes the available 3D data from the current PCB to create a standalone section drawing that is aligned to the nominated cut point.
To begin the process of creating a Section View, use the Place » Board Sectional View command, or select the icon from the Additional Views drop down on the Active Bar. The steps to create Section B-B shown in the following image would be:
A-A) will follow the cursor movement – use the Spacebar to toggle between vertical and horizontal cut lines.
Any number of Board Section Views can be created from an Assembly View, and the section properties may be modified after they are placed. Select a Section View and use the Properties panel to set the view's visual properties, such as its scale, label, style, and orientation.
► See Board Section View Properties for information on the property settings available for a Section View.
A Draftsman Board Isometric View is a standard isometric projection graphic of the currently specified PCB assembly. It can placed in a document with the Place » Board Isometric View command.
The properties and option settings for a placed Isometric View are available in the Properties panel when a placed Isometric View is selected in the workspace. In the panel's Properties section, use the Face Side drop down menu to select the projection view perspective, and the Variants menu to specify which project design variation (if available) is shown.
► See Board Isometric View Properties for information on the property settings available for an Isometric View.
A Draftsman Component View is an Assembly View -style drawing object of a single component from the current board design. When set as a profile view, the rendered Component View object includes the related profile section of the supporting PCB.
To place a Component View select Place » Additional Views » Component View, or choose the Component View option () from the Additional Views drop down on the Active Bar – note that the latter option is enabled when an Board Assembly View has been placed in the document.
A placed Component View will initially show first Component registered in the BOM data. This can be changed to the desired component from the Component menu in the Properties section of the Properties panel, which also offers the property settings that define the Component View's graphic style and view angle.
► See Component View Properties for information on the property settings available for a Component View.
A Draftsman document's Layer Stack Legend view provides a representation of the board's internal structure as an enlarged sectional view. It includes detailed descriptions and information for each layer in the stack, including the Gerber files associated with each layer.
To place a Layer Stack Legend view in a drawing document, use the Place » Layer Stack Legend command or select the Icon from the Additional Views drop down on the Active Bar.
By default, the information for each layer is derived from the corresponding attributes in the Board Layer Stack, as defined in the Layer Stack Manager dialog (Design » Layer Stack Manager in the PCB Editor), however the layer description attributes may be edited and expanded in Draftsman through the Properties panel and the Layer Information dialog.
► See Layer Stack Legend Properties for information on the property settings available for a placed Layer Stack view.
Controlled Depth Drilling (Backdrilling) in Altium NEXUS is a methodology for detecting and removing electrically redundant sections of plated through holes.
These are typically found where a standard through-hole Via connects the signal to an inner layer, leaving the remaining portion of the Via barrel as an undesired ‘stub’ – in turn, this stub is likely to compromise the performance of a high speed design. In the backdrilling technique, the stubs are removed by drilling to a precise (Z) depth with a slightly oversized drill.
Altium NEXUS uses a specific Design Rule and assigned Back Drill Pairs to automatically create the correct NC Drill output files. In a Draftsman document this arrangement is represented in the Layer Stack Legend, which includes a graphical representation of all Drill Pairs defined for the board, including any Back Drill Pairs (shown with partially drilled out Via barrels).
The Draftsman editor supports PCB document Embedded Board Arrays, allowing Draftsman documents to provide drawing details of multiple boards placed as a panel array.
When a panelized (embedded array) version of a board design is opened as the file source for a new Draftsman document, the board design data is correctly interpreted by Draftsman as a board array. Choose the project’s board array design as the source from the Document drop down menu in the New Document dialog (File » New » Draftsman Document) , or for an existing Draftsman document, select the board array PCB file from the PCB Document menu in the Source section of the Properties panel when in Document Options mode (no drawing object selected).
Placed drawing views such as Assembly, Fabrication and Drill Drawing views will extract design data from the source board array PCB file.
Draftsman includes the capability to place and configure industry standard Geometric Dimensioning and Geometric Tolerances symbolic elements that define the manufacturing properties of objects included in a drawing.
Also used in most advanced MCAD applications, the specialized information provided by the placed geometric symbols stipulate the allowable imperfections in the manufacture of physical objects. The geometric definition elements that can be added to Draftsman documents are derived from standards developed by the American Society of Mechanical Engineers (ASME) – specifically, the ASME Y14.5-2009 Dimension and Tolerancing standard. Many other standards and guidelines exist for geometric engineering definitions, including a large number of conceptually specific documents from the International Organization for Standardization (ISO).
► See Geometric dimensioning and tolerancing for overview information and reference links.
In terms of Draftsman engineering documents, the symbol-based Dimensioning and Tolerancing information is incorporated into a drawing by the placement of two types of objects:
Both of the above drawing objects can be positioned freely in the document, or (normally) attached to a feature such as an edge. In the same way in which other Drawing Annotations are placed in Draftsman, such as Surface Finish symbols, the geometric definition symbols are attached by clicking on a highlighted line in the drawing and then clicking again to place the symbol.
Place a Datum Feature on a drawing using the Place » Datum Feature menu command or by selecting the icon from the Annotations drop down on the Active Bar. The attached Datum element simply identifies that feature, such as an edge, as a reference on that drawing object.
The Datum Feature is identified by its Label entry in the Properties panel, so that relative dimension tolerances included in Feature Control Frames (see below) can refer to this and other placed datum.
► See Datum Feature Properties for information on the settings available for a placed Datum object.
Place a Feature Control Frame on a drawing using the Place » Feature Control Frame menu command or by selecting the icon from the Annotations drop down on the Active Bar, and attach it to a drawing feature as outlined above, or place it free space.
The information it conveys, presented in symbols, modifiers and numeric values, is entered in the Properties panel.
A Feature Control Frame offers symbol options and large number of elements that can be attached to specify manufacturing tolerances and constraints. Attached machining tolerances, such as the 'straightness' of a feature for example, apply to the specified drawing object face. Attached Dimension tolerances by comparison (such as 'position') are generally specified as relative to one or more placed Datum.
► See Feature Control Frame Properties for information on the property settings available for a placed Feature Control Frame.
When added to the mechanical elements in a Draftsman drawing view, the combined information represented by Feature Control Frames and their related Datum references can fully describe the acceptable manufacturing constraints for that physical element.
In the example drawing view shown below, dimensions have been added, Datum Feature references attached to the three visible board edges, and Feature Control Frames applied to the top edge and two mounting holes. The Feature Control Frames have multiple elements added, which appear as a sequence of (selectable) rows – note the Add, Delete etc buttons in the Selected Element area of the Properties panel.
The symbols and formatting used in the various Feature Control Frames is fully described in the ASME standard, however an overview of the examples shown above is as follows:
Altium Draftsman provides a range of additional drawing and annotation tools designed to add important information to a Draftsman drawing document. These include both automated note and highlighting systems plus free-form drawing capabilities.
The Active Bar (positioned at the top of the workspace) offers a range of drop down menus that include placement commands for all Annotation, Table and Drawing objects. The Draftsman dimensioning tools apply to a placed Board Drawing views and are available from their respective icons on the Active Bar Dimensions drop down.
Annotation placement commands are also available from Draftsman's main Place menu, or from the Drawing Annotations toolbar – View » Toolbars » Drawing Annotations.
Object dimension graphics may be placed on Board Views (Assembly, Fabrication, Section, Details, etc) to indicate the lengths, sizes, and angles of the object outlines, or the distance between nominated objects. To place a dimension graphic, select the desired type from the Place menu or from the Dimension drop down on the Active Bar.
A Draftsman Linear Dimension graphic can be added to an object's outline edge or between two object vertices. This allows a dimension to be placed on the side of an object, between two points on an object, or between nominated sides/vertices of two different objects.
To place a Linear Dimension, select Place » Linear Dimension from the main menu or the icon from the Active Bar dropdown.
A dimension graphic can be moved after it has been placed in an angular plane (horizontal, vertical, diagonal), and the dimension text placed within or outside the Extension lines. Most aspects of a placed dimension are available for editing in the Linear Dimension mode of the Properties panel – select a placed dimension to enable its associated panel mode.
► See Linear Dimension Properties for information on the property settings available for a placed Linear Dimension.
A Draftsman Radial Dimension can be added to a circular board object (hole) on an Board Assembly View or an associated graphic such as a Board Detail View. The text of the placed Radial Dimension reports the board object diameter.
To place a Radial Dimension, select Place » Radial Dimension from the main menu or the icon from the Active Bar dropdown.
The Radial dimension measurement graphic can be moved (select and drag) or edited in a similar way to the Linear Dimension graphic. Again, most aspects of the placed dimension are available for editing in the Radial Dimension mode of the Properties panel – select a placed radial dimension to enable its associated panel mode.
► See Radial Dimension Properties for information on the property settings available for a placed Radial Dimension.
A Draftsman Angular Dimension can be added between two object edges on a Board Assembly View or an associated view such as a Board Detail View. The automated dimensioning graphic reports the relative angle between two object faces, such as the sides/edges of a component or board.
To place a Angular Dimension, select Place » Angular Dimension from the main menu or the icon from the Active Bar dropdown.
The Angular dimension measurement graphic can be moved (select and drag) or edited in a similar way to the Linear Dimension graphic. Most aspects of the placed dimension are available for editing in the Angular Dimension mode of the Properties panel – select a placed angular dimension to enable its associated panel mode.
► See Angular Dimension Properties for information on the property settings available for a placed Angular Dimension.
A Draftsman Ordinate Dimension is composed of multiple linear dimension elements that are relative to a single reference point. The indicated dimensions are effectively cumulative as they are placed at increasing distances from the nominated reference point, and can be placed on the outlines edges or vertices of a placed board view or its constituent objects.
To place an Ordinate Dimension set, select Place » Ordinate Dimension from the main menu or the icon from the Active Bar dropdown. The first location selected is the base coordinate that acts as the reference for the subsequent dimension points.
A placed Ordinate Dimension set can be graphically edited by adding dimension points to the ordinate set, or removing existing dimensions from the set. The visual style of the dimension lines and text are editable in the Properties panel, when a placed Ordinate Dimension is selected.
► See Ordinate Dimension Properties for information on the property settings available for a placed Ordinate Dimension set.
A Draftsman document Callout is used to provide further information on components and general objects in Board Views. The Callout text information can be synchronized indicators for BOM entries and Note items, a specified Component Parameter or custom text.
To place a Callout, select Place » Annotations » Callout from the main menu or the icon from the Active Bar dropdown. During placement, the Callout object will change between its 'attached' mode and free mode in response to the underlying object. When hovered over a side or corner of an object, the highlighted dot or line indicates that the Callout will be attached to that object – when not highlighted the placed Callout will refer to a location, rather than an object.
The Callout Source Text option in the Properties section of the Properties panel will determine the context of the text attached to the Callout (its 'tag'). By default, an attached type Callout will display the BOM entry of the component it is attached to, and a general type Callout will show a custom text string – initially set to '
► See Callout Properties for information on the property settings available for a placed Callout.
Draftsman allows the placement of Surface Finish graphical symbols and their associated parameters that comply with the ISO 1302:2002 International Standard for surface texture in technical product documentation. The standard specifies the rules for the indication of surface texture in drawings, based on special symbols and attributes that describe the permitted surface material for the product – in this case, a printed circuit board.
The addition of Surface Finish indicators in Draftsman avoids the need for a separate Surface Finish tool or application when this standardized information is required for PCB manufacture. The graphical symbols are accompanied by a range specialized text codes, as defined by the ISO standard, that are added via the Draftsman Properties panel when a placed Surface Material object is selected.
To place a Surface Material symbol in a drawing, select Place » Annotations » Surface Finish from the main menu (or the icon from the Active Bar), and then locate the symbol where it is associated with the board surface. Attach the symbol to a drawing by clicking on a highlighted line and then clicking again to place the symbol. The attached surface indicator can be dragged along the line, and optionally, away from the drawing via an automatic Extension Line – enabled by the With Leader option in the Properties panel.
► See the Surface Finish object page for more information on placement and editing.
In most cases only one or two surfaces need to be defined, such as the surface of the top and bottom layers, so a minimal number of symbols/attributes are usually required. However, the indicators may be applied to the face of any engineered object, including the surfaces of rendered components.
The style of the Surface Finish symbol itself indicates the allowed processing of the surface material, as follows:
The string-based parameters (attributes) that are associated with the symbol indicate a range of manufacturing options, as defined by the standard:
► See Surface Finish Properties for information on the property settings available for a placed surface Finish object.
► See the ISO Geometrical Product Specifications page for more information about the
ISO 1302:2002 standard.
Draftsman document Note Item lists can be placed as free text entries in any location, and used to provide additional information about the current Draftsman drawing. The Note entries may be referenced by Callouts, and include smart strings that interpret any available Parameters (see below).
To place a Note Item, select Place » Annotations » Note from the main menu or the icon from the Active Bar, and then click to place the default Note entries in the drawing space. Select an entry in the list to edit its text content and number icon style in the Properties panel. Use the Add/Delete buttons to include and remove list entries, and configure the order of the text entries using the Up/Down buttons.
► See Note Properties for information on the property settings available for a placed Note list object.
To use a Parameter in a Note entry, along with its related text, first select the relevant note entry and then the icon in the Properties panel to open the Document Parameters dialog. Choose from the listed Parameters in the dialog and select OK to confirm the selection – the Parameter string will be inserted at the current cursor position within the Note Description text box.
A Draftsman document allows Bill Of Materials (BOM), Tables, and Drill symbol/data tables to be placed on the drawing and subsequently configured in the Properties panel. The tabular data is directly derived from the project PCB files and provides a simple, visual way to convey crucial information for the PCB fabrication and assembly processes.
The BOM/Drill/Table placement options are available from the main Place menu or from their respective icons in the Table drop down on the Active Bar.
A Draftsman Bill Of Materials (BOM) is an automatically generated table object that lists the physical assembly items in a PCB design. The BOM table data is derived directly from the project PCB file, or if one is present in the current project, an Active BOM document.
To place a BOM table, select the BOM table placement tool and click to position the table on the drawing document. Select the placed table to access its property settings in the Properties dialog, which provides configuration options for most aspects of the BOM table, including its visual attributes and data content source.
The entries shown in a placed BOM Table are determined by the source data from the project files and the filtering conditions specified in the Properties panel. Select the Project option from the Data Source menu to enable all project data, including custom component Parameters from the project schematic document(s).
The Properties panel options can restrict BOM entries to those included in the Board layout (as opposed to the entire PCB project) or to a specific Variation of the design. Further tailoring of the included entries is available through specifying the top or bottom view of a placed Board Assembly View.
► See Bill of Materials Properties for information on the property settings available for a placed BOM table.
Use the Properties panel's Columns tab to manage the BOM table's data columns. This allows control of the BOM table column visibility, text alignment, width and data sort order. BOM Table headings may be changed by entering an Alias for a table column parameter name.
The Bill of Materials (BOM) document for most advanced PCB projects tends to have a large number of entries, which can be difficult to recreate as a table that will fit into a drawing document. Rather than resorting to font and table scaling, multiple custom table entries or an external document, the Split BOM capability in the Properties panel allows a BOM Table to be presented over a number of 'pages'.
To create the multiple BOM Pages, select a placed BOM (which is likely to exceed the document Sheet height) and check the Limit Page Height box in the Properties panel’s Pages section. This will restrict the height of the BOM table to the nominated height entry (Max Page Height, mm), and therefore the number of lines shown in the BOM table.
Draftsman detects that the entire BOM is not shown, as indicated by the panel's Page entry (for example,
1 from 2), and the associated drop down menu allows you to nominate which Page is shown. To add further Pages of the BOM (here, BOM Table ID:
0), place another BOM (Place » Bill of Materials) and specify the next page under Page in the Pages section of the Properties panel.
Since each Page of the BOM is placed by adding another BOM table, and then configuring it accordingly, the individual BOM Pages (sections) can be placed on any Sheet in a Draftsman document. To place another, different set of split BOM Pages, specify an alternative BOM Table ID on a placed BOM – say,
1 rather than
A Draftsman document allows a generic Table to be placed on the drawing and subsequently configured in the Properties panel, and in the table cells themselves. The layout and content of the custom Table is free to be defined as required by its intended purpose, and offers a flexible way to include additional information in any Draftsman document.
A Table is placed from the main menu (Place » Table), or from the Table icon () on the table drop down of the Active Bar. Use the following Insert Table dialog to nominate the initial number of rows and columns in the new Table, and therefore its number of cells.
Data is entered by typing (or pasting) directly into the cells, while the Table's graphics and text attributes are defined in the Properties panel. The Table object offers a wide range of text and structure editing features, which can be implemented on a cell row or column basis using standard Shift/Ctrl or drag selection techniques.
► See Table Properties for information on the property settings available for a placed Table object.
Right click in a cell and select the Table menu from the context menu to access the cell configuration commands. These provide a full set of Table manipulation functions for adding and removing Columns/Rows and Merging Cells.
By using both the Table commands and the options available in the Table's Properties, a custom Table can be created to suit a wide range of information needs in a Draftsman document. The Table shown below, for example, has been constructed to show the information taken from a board Stack Report.
A Draftsman Drill Table presents a tabular view of board drill symbols and associated data, where a Symbol row, representing a specified type of drill hole, can include a range of hole information such as its size, plated construction and population count. Holes types are grouped under symbols as specified in the Drill Symbol Configurations dialog.
To place a Drill Table for the current PCB, select Place » Drill Table or use the Drill Table icon () on the table drop down of the Active Bar.
Select the placed Drill Table to access its property settings in the Properties panel. This provides configuration options for most aspects of the Drill Table, including its visual attributes and data content (through options in the Properties and Column sections).
► See Drill Table Properties for information on the property settings available for a placed Drill Table.
The Drill Table's Symbol styles, and the grouping of drill hole types under those symbols, is determined by the settings in the Drill Symbol Configurations dialog opened from the Properties panel's button (in the Properties section). This is the same dialog that is activated from the Properties panel when in Drill Drawing View mode, but in this case, only those columns activated (made visible) for the Drill Table will be shown. Note that the two Drill Symbol Configuration dialogs versions are from the same source and therefore interact.
Draftsman provides a range of graphical element tools that can be used to place basic, free-form drawing elements in a document. The tools are accessed from the main Place menu, from the Graphical Tools drop down menu () on the Drawing Annotations toolbar or the graphic tools drop down on the Active Bar.
Place a graphic element by clicking to position its first node/point and then again to place following nodes, therefore determining its size – such as the length for a line, the radius for a circle, the distance between opposite vertices for a rectangle or text box, or the dimensions of a placed image graphic. The nodes will snap to the nodes or guidelines of other objects, and optionally, the document snap grid if enabled.
► See the snapping options in the General section of the Document Options for graphical primitives snap settings.
Placed graphical elements can be moved by selecting and dragging, or when multiple elements are selected (Ctrl-shift + click, or by lassoing). Individual nodes can also be selected and moved. For more options, select a placed graphical element to enable its associated mode in the Draftsman Properties panel.
► For more information on Draftsman graphical objects, and their associated settings in the Properties panel, see:
Draftsman provides further graphical options through the import of standard DXF files, which are loaded into the drawing space from the File » Import from DXF menu command. Use the Windows file browser to select a
*.DWG file then configure the import options from the DXF Import Settings dialog that opens.
Draftsman documents may be printed or generated as output files in the same manner as other graphics-based documents in Altium NEXUS (Schematic, PCB, etc.). New Draftsman documents (once saved) are automatically added to the associated PCB project, and are therefore available to all normal document generation and printing processes.
Print or Export to PDF
To print the currently active drawing document, select File » Print from the main menu (or Ctrl+P) and select the print options in the normal way. For Draftsman documents, the print dialog includes a scalable print preview with page navigation selectors.
To export a drawing document to a single or multi-page PDF file (as determined by the document structure), select File » Export to PDF from the main menu.
Add to OutJob
A Draftsman drawing document is added to an OutJob by first opening an existing Output Job file or creating a new Output document (File » New » Output Job File).
To add a Draftsman document to the output job, select the Add New Documentation option under the Documentation Outputs section, and then select Draftsman and a
PCBDwF file (or all available documents). Assign the newly added Output file (
*.PCBDwF) to a PDF output by selecting that container option and then checking the enable option associated with the Draftsman entry.
Altium NEXUS has the ability to create variations of a board design (Variants) and pass pass this variant information on to Draftsman, which in turn allows a design variation to be applied to a placed drawing View.
Project Variants are added in the project's Variant Management dialog, which also allows Parameters to be added to each variant. These parameters are typically applied as special (interpreted) strings in Altium NEXUS documents to indicate which Variant is currently enabled.
In Draftsman, a project’s current variant selection is made from the Variation menu in the in the Properties region of the Properties panel, which causes a placed Board Assembly View to change to reflect the variation, and apply mesh rendering where required – see the General section in the Properties panel Document Options for Variant display settings.
Special strings, such as the VariantName and Variant Parameters can be placed in the drawing as free strings, or for a more universal solution, included in the title block of Draftsman sheet templates – see the Document Parameters dialog for a list of the available parameter strings.
When a saved Draftsman document is subsequently generated from an Altium NEXUS Output Job, the parameter special strings are interpreted in line with the Variant selected in the OutJob. Note that a Variant may be applied to all outputs, or specific outputs.
Contact our corporate or local offices directly.