Altium NEXUS Documentation

Arc

Modified by Susan Riege on Feb 22, 2019
This documentation page references Altium Vault, which is no longer a supported product. Altium Vault and its component management features have migrated to Altium Concord Pro.
All Contents

Parent page: Multi-board Schematic Objects

Two placed Arcs; the one on the left is in edit mode.

Summary

An Arc is a graphic object that can be placed on a multi-board Design schematic document and set to the desired arc angle, radius and line style. An Arc can be placed using a center or three-point method.

Availability

An arc can be placed in the multi-board schematic editor in the following ways:

  • Choose the Place » Arc (By Center) or Place » Arc (3 Points) command from the main menu.
  • Click the  or  button in the graphic objects drop-down on the Active Bar located at the top of the workspace. Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the topmost item on that section of the Active Bar.
  • Right-click in the drawing workspace then select Place » Arc (By Center) or Place » Arc (3 Points) from the context menu.

Placement

After launching either command, the cursor changes to a cross-hair indicating Arc placement mode.

Arc by Center placement steps:

  1. Click to set the center point of the arc.
  2. Move the cursor to adjust the radius and starting point of the arc then click to confirm.
  3. Move the cursor to set the end point (and total angle) of the arc then click to confirm.
  4. Continue placing further arcs or right-click or press Esc to exit arc placement mode.

Arc in 3 Points placement steps:

  1. Click to set the starting point of the arc (point #1).
  2. Move the cursor to set the end point of the arc then click to confirm (point #2).
  3. Move the cursor to set the radius of the arc then click to confirm (point #3).
  4. Continue placing further arcs or right-click or press Esc to exit arc placement mode.
The default settings for the Arc object are available in the Multi-board Schematic - Defaults page of the Preferences dialog.

Graphical Editing

This method of editing allows a placed Arc object to be selected in the workspace and then graphically edit its location, radius and start/end points.

Select an Arc by clicking on its outline. Once selected, editing handles/nodes are available at its center, perimeter and start/end points:

The ways in which Arc nodes may be manipulated.

  • Click and drag the arc's center node to reposition it on the drawing document.
  • Click and drag a start or end point node to alter the arc angle.
  • Click and drag the perimeter node to change the radius of the arc.

Advanced manipulation of an Arc is available by pressing the Ctrl key while moving an editing node:

  • Click and drag a start or end point node to alter its location while retaining the arc angle.
  • Click and drag the perimeter node to alter the size of the arc while retaining its start and end points.

Non-Graphical Editing

Properties page: Arc Properties

The non-graphical method of editing an Arc is available in the Properties panel, which provides editable property fields for the item that is currently selected in the workspace.

The Properties panel when an Arc object is selected.

To open the Properties panel and access the properties of a placed Arc:

  • Double-click on the Arc's perimeter.
  • Right-click on the Arc perimeter then select Item Properties from the context menu.
  • If the Properties panel is already active, click on the Arc's perimeter to access its properties in the panel.
To manually open the Properties panel, select View » Panels » Properties from the main menu or click the button at the bottom right of the workspace then select Properties from the pop-up menu.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

You are reporting an issue with the following selected text
and/or image within the active document:
ALTIUM DESIGNER FREE TRIAL
Altium Designer Free Trial
Let’s get started. First off, are you or your organization already using Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

In that case, why do you need an evaluation license?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You actually don’t need an evaluation license for that.

Click the button below to download the latest Altium Designer installer.

Download Altium Designer Installer

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Please fill out the form below to get a quote for a new seat of Altium Designer.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

If you are on Altium Subscription, you don’t need an evaluation license.

If you are not an active Altium Subscription member, please fill out the form below to get your free trial.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Why are you looking to evaluate Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

You came to the right place! Please fill out the form below to get your free trial started.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

That’s great! Making things is awesome. We have the perfect program for you.

Upverter is a free community-driven platform designed specifically to meet the needs of makers like you.

Click here to give it a try!

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.