Altium NEXUS Documentation

Configuring Schematic Bezier Object Properties in Altium NEXUS

Created: September 25, 2019 | Updated: October 4, 2019

Parent page: Bezier

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Bezier object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (access from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.

  • Post-placement settings – all Bezier object properties are available for editing in Bezier dialog the Properties panel when a placed Bezier is selected in the workspace.

 

If the Double Click Runs Interactive Properties option is disabled (default) on the Schematic - Graphical Editing page of the Preferences dialog, when the primitive is double-clicked or you right-click on a selected primitive then choose Properties, the dialog will open. When the Double Click Runs Interactive Properties option is enabled, the Properties panel will open. 
While the options are the same in the dialog and the panel, the order and placement of the options may differ slightly. 
In the below options listing, options that are not available as default settings in the Preferences dialog are noted as "Properties panel only".

Properties

  • Curve Width - use the drop-down to select the desired curve width. Choices are Smallest, Small, Medium, and Large. Click the color box to set the desired color.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: