Round Rectangle Properties

Now reading version 1.0. For the latest, read: Round Rectangle Properties for version 4
Applies to NEXUS Client versions: 1.0 and 1.1

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

Parent page: Round Rectangle

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Round Rectangle object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (access from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Round Rectangle object properties are available for editing in the Properties panel when a placed Round Rectangle is selected in the workspace.

The Round Rectangle default settings in the Preferences dialog and the Round Rectangle mode of the Properties panel               The Round Rectangle default settings in the Preferences dialog and the Round Rectangle mode of the Properties panel

In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as "Properties panel only".

Location (Properties panel only)

  • (X/Y) - the X (horizontal) coordinate and Y (vertical) coordinate of the object. 

Properties

  • Width - the width of the rectangular shape. 
  • Height - the height of the rectangular shape. 
  • Corner X-Radius - the curvature of the rectangle's corners in the horizontal plane.
  • Corner Y-Radius - the curvature of the rectangle's corners in the vertical plane.
  • Border use the drop-down to select the default border width from the available choices: SmallestSmallMedium, or Large. Click on the color box to change the color.
  • Fill Color - enable to use a fill color. Click on the color box to select the color. 
Content