Altium Designer Home
...
((Dialog Reference))_AD
Dialogs((S to Z))_AD
PCB_Dlg-Reconnect_OptionsFormSubnet Connector_AD
Created: 2月 09, 2023 | Updated: 2月 09, 2023
The Subnet Connector dialog
Summary
The Subnet Connector dialog provides controls to specify the maximum subnet separation.
Access
The dialog is accessed by clicking Route » Add Subnet Jumpers from the main menus.
Options/Controls
- Maximum Subnet Separation - enter a value for the maximum subnet separation (100mil is the default value) of incomplete routing segments.
- Run - click to automatically add subnet connectors to complete short routing segments (tracks that still have connection lines in between) on the current PCB document.