Skip to main content

Ver: Version: 19.1

22 21 20.2 20.1 20.0 19.1 19.0 18.1 18.0 17.1 17.0 16.1 16.0 15.1

Close

Search Search on Documentation

Altium Designer Documentation

Documentation

Altium Designer Documentation ... Command Reference CAMtastic Commands

MacroEdit

Created: June 10, 2016 | Updated: April 11, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:

Edit Macro Script

Applied Parameters: None

Summary

This command is used to open a macro script file for editing.

Access

This command is accessed from the CAMtastic Editor by choosing the Macro » Edit Script command from the main menus.

Use

After launching the command, the Open Macro File dialog will appear. Use this dialog to locate and open the macro file (*.bas) that you wish to edit. The macro file will open as the active document in the main design window. You can then edit the script as required.

Tips

The scripting language used is Enable Basic.

Note

This documentation page contains information for an older version of Altium Designer. The latest, online documentation can be found here.