Skip to main content

Ver: Version: 19.1

22 21 20.2 20.1 20.0 19.1 19.0 18.1 18.0 17.1 17.0 16.1 16.0 15.1

Close

Search Search on Documentation

Altium Designer Documentation

Documentation

Altium Designer Documentation ... Command Reference CAMtastic Commands

ToolsMillArrow

Created: June 11, 2016 | Updated: April 11, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:

Display Direction Arrows

Applied Parameters: CommandMode=NC

Summary

This command is used to toggle the display of direction arrows for rout paths.

Access

This command is accessed from the CAMtastic Editor by choosing the View » Display Symbols » Direction Arrows command from the main menus.

Use

After launching the command, the direction arrows on rout paths will either appear or disappear, depending on their current visibility status.

Note

This documentation page contains information for an older version of Altium Designer. The latest, online documentation can be found here.