LineOrBorderWidthSelect

Created: August 03, 2017 | Updated: July 31, 2018 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

The following pre-packaged resources, derived from this base command, are available:

Applied Parameters: _Value_=Smallest

Summary

This command is used to change the width of the line (or border) for the selected design object to Smallest, where applicable.

This command is accessed from the Schematic Editor by clicking the button on the Line or Border Width drop-down () of the Formatting toolbar.

First, ensure that the object whose line width or border width you wish to change is selected in the main design workspace.

After launching the command, the object's line or border width, as applicable, will be set to Smallest and change graphically in the workspace.

This feature will only be available if applicable to the currently selected object. That is, it has a Width or Border property.
You can select multiple objects to have their Width/Border changed using this feature.

Applied Parameters: _Value_=Small

This command is used to change the width of the line (or border) for the selected design object to Small, where applicable.

This command is accessed from the Schematic Editor by clicking the button on the Line or Border Width drop-down () of the Formatting toolbar.

First, ensure that the object whose line width or border width you wish to change is selected in the main design workspace.

After launching the command, the object's line or border width, as applicable, will be set to Small and change graphically in the workspace.

This feature will only be available if applicable to the currently selected object. That is, it has a Width or Border property.
You can select multiple objects to have their Width/Border changed using this feature.

Applied Parameters: _Value_=Medium

This command is used to change the width of the line (or border) for the selected design object to Medium, where applicable.

This command is accessed from the Schematic Editor by clicking the button on the Line or Border Width drop-down () of the Formatting toolbar.

First, ensure that the object whose line width or border width you wish to change is selected in the main design workspace.

After launching the command, the object's line or border width, as applicable, will be set to Medium and change graphically in the workspace.

This feature will only be available if applicable to the currently selected object. That is, it has a Width or Border property.
You can select multiple objects to have their Width/Border changed using this feature.

Applied Parameters: _Value_=Large

This command is used to change the width of the line (or border) for the selected design object to Large, where applicable.

This command is accessed from the Schematic Editor by clicking the button on the Line or Border Width drop-down () of the Formatting toolbar.

First, ensure that the object whose line width or border width you wish to change is selected in the main design workspace.

After launching the command, the object's line or border width, as applicable, will be set to Large and change graphically in the workspace.

This feature will only be available if applicable to the currently selected object. That is, it has a Width or Border property.
You can select multiple objects to have their Width/Border changed using this feature.