Skip to main content

Ver: Version: 19.1

21 20.2 20.1 20.0 19.1 19.0 18.1 18.0

Close

Search Search on Documentation

Altium Designer Documentation

Documentation

Altium Designer Documentation ... Command Reference SystemDesigner Commands

SelectAll

Created: July 07, 2017 | Updated: September 18, 2017 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: SystemDesigner Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None

Summary

This command is used to select all objects on the active Multi-board Schematic document (*.MbsDoc).

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Schematic Editor by:

Choosing the Edit » Select All command, from the main menus.
Using the Ctrl+A keyboard shortcut.

Use

After launching the command, all objects on the current document will become selected.

Note

This documentation page contains information for an older version of Altium Designer. The latest, online documentation can be found here.