メインコンテンツに移動

Ver: Version: 19.1

21 20.2 20.1 20.0 19.1 19.0 18.1 18.0

Close

検索 Search on Documentation

Altium Designer Home

Documentation

Altium Designer Home ... ((Command Reference))_AD ((SystemDesigner Commands))_AD

SystemDesigner_Cmd-ViewPanViewPan_AD

Created: 7月 07, 2017 | Updated: 9月 18, 2017 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: SystemDesigner Commands

The following pre-packaged resource, derived from this base command, is available:

View Document at 100%

Applied Parameters: None

Summary

This command is used to set the magnification of the active Multi-board Schematic document (*.MbsDoc) to 100% (normal print size).

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command is accessed from the Multi-board Schematic Editor by choosing the View » Scale 100% command, from the main menus.

Use

After launching the command, the view of the current document will be set to a magnification of 100%.

注記

This documentation page contains information for an older version of Altium Designer. The latest, online documentation can be found here.