WorkspaceManager_Cmd-SendToVaultSendToVault_AD

Created: 5月 09, 2019 | Updated: 5月 09, 2019 | Applies to versions: 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: WorkspaceManager Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: ObjectKind=Document

Summary

This command is used to send the active schematic document to a server.

Access

With the desired schematic active, this command can be accessed by clicking File » Send to server from the main menus.

Use

Ensure that the schematic you want to send to the server is the active document.

After launching the command, a trimmed down version of the Explorer panel (titled Choose Planned Item Revision) will open in which you can create the new managed schematic sheet by clicking Add an item then choosing Create Item » Managed Schematic Sheet to open the Create New Item dialog.

After launching the command, a trimmed down version of the Explorer panel (titled Choose Planned Item Revision) will open in which you can create the new managed schematic sheet by clicking Add an item then choosing Create Item » Managed Schematic Sheet to open the Create New Item dialog.

Tips

Before launching the command, ensure that the schematic you want to send to the server is the active document.