Query_Lang-PCBFunctions_LayerChecks_OnInvertedOnInverted_AD

Created: September 03, 2015 | Updated: August 20, 2021 | Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: PCB Query Functions - Layer Checks

Summary

Returns all objects on the following layers: Top Paste, Bottom Paste, Top Solder, Bottom Solder, and Internal Plane layers (Internal Plane 1-16). These layers are all of an "Inverted" or "Reverse" nature, because the presence of any object on these layers results in a corresponding opening in a solder paste stencil, or in the solder mask film, or a corresponding absence of copper (in the cases of Paste Mask, Solder Mask, and Internal Plane layers respectively).

Syntax

OnInverted : Boolean

Example Usage

OnInverted
OnInverted = True
Returns all objects on the following layers: Top Paste, Bottom Paste, Top Solder, Bottom Solder, and Internal Plane layers (Internal Plane 1-16).

Not OnInverted
OnInverted = False
Returns all objects except objects on the following layers: Top Paste, Bottom Paste, Top Solder, Bottom Solder, and Internal Plane layers (Internal Plane 1-16).