Skip to main content

Ver: Version: 19.1

21 20.2 20.1 20.0 19.1 19.0

Close

Search Search on Documentation

Altium Designer Documentation

Documentation

Altium Designer Documentation ... Command Reference LayerStackManager Commands

LayerDown

Created: December 04, 2018 | Updated: January 17, 2019 | Applies to versions: 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: LayerStackManager Commands

The following pre-packaged resource, derived from this base command, is available:

Move Layer Down

Applied Parameters: None

Summary

This feature is used to move the selected layer down in the Layer Stack within the layers of the same type.

Access

This command can be accessed from the Layer Stack by choosing the Edit » Layer Down command from the main menus or right-click on the layer then choose Move layer down.

Use

After launching the command, the selected layer will be moved down within the layers of the same type.

Note

This documentation page contains information for an older version of Altium Designer. The latest, online documentation can be found here.