ProcessTable

Created: June 11, 2016 | Updated: April 11, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:

Access Step Information

Applied Parameters: None

Summary

This command is used to access the Steps Table dialog, from where you can view ODB++ Step information for the current document.

Access

This command is accessed from the CAMtastic Editor by choosing the Tables » Steps command from the main menus.

Use

After launching the command, the Steps Table dialog will appear. This dialog displays each of the ODB++ Steps that have been defined for the current document, in terms of Step Name and the amount of objects associated.

Tips

When you click OK in the Steps Table dialog, the Steps tab on the CAMtastic panel will be refreshed. You can add/modify Steps from this tab, by right-clicking and choosing the appropriate command from the context menu. Press F1 over the CAMtastic panel to access the panel help, from where you can gain more detailed information about the Step-related commands.
The Steps Table dialog will appear automatically when importing ODB++ files into the CAMtastic Editor.