Skip to main content

Ver: Version: 19.0

21 20.2 20.1 20.0 19.1 19.0

Close

Search Search on Documentation

Altium Designer Documentation

Documentation

Altium Designer Documentation ... Command Reference MultiBoardAssembly Commands

ToggleSectionView

Created: December 05, 2018 | Updated: December 12, 2018 | Applies to versions: 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: MultiBoardAssembly Commands

The following pre-packaged resources, derived from this base command, are available:

Toggle Section View

Applied Parameters: None

Summary

This feature is used to toggle the visibility of a Section View in a Multi-Board Assembly document (*.MbaDoc).

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from a Multi-Board Assembly document in the following ways:

Choose View » Toggle Section View from the main menus.
Use the button on the Active Bar.
Use the Ctrl+Shift+V or S shortcut keys.

Use

After launching the command, the Section View will be toggled on or off.

Note

This documentation page contains information for an older version of Altium Designer. The latest, online documentation can be found here.