ZoomPan

Created: June 11, 2016 | Updated: April 11, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:

Zoom Around Point

Applied Parameters: None

Summary

This command is used to redefine the display area about a specified point in the current document.

Access

This command can be accessed from the CAMtastic Editor by:

Choosing the View » Around Point command from the main menus.
Using the Shift+P keyboard shortcut.
Right-clicking within the workspace and choosing the Around Point command from the context menu.

Use

After launching the command, you will be prompted to select a new center point for the main design window. Simply position the cursor at the required location in the workspace and click to define this center point. The view in the main design window will change, with this selected point now at the center.

Continue to change the view by selecting different points to center, or press Esc to exit.

Tips

This command will not affect the current zoom-level applied to the document.