Skip to main content

Ver: Version: 18.1

22 21 20.2 20.1 20.0 19.1 19.0 18.1 18.0

Close

Search Search on Documentation

Altium Designer Documentation

Documentation

Altium Designer Documentation ... Command Reference PCB Commands

SwitchModelsVisibilities

Created: April 15, 2018 | Updated: April 15, 2018 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Toggle 3D Model Visibility

Applied Parameters: None

Summary

This command is used to toggle the 3D model visibility in the current PCB document.

Access

This command can be accessed from the PCB Editor and PCBLIB editor by using the Shift+Z shortcut keys in a document that includes a placed 3D object.

Use

After launching the command, the document view switches to 2D (when run from the 3D view) or 3D (when run from the 2D view). In 3D mode, the 3D model is visible in the document.

Note

This documentation page contains information for an older version of Altium Designer. The latest, online documentation can be found here.