ZoomWindow

Created: June 11, 2016 | Updated: April 11, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:

Zoom Area

Applied Parameters: None

Summary

This command is used to redefine the display area in the current document.

Access

This command can be accessed from the CAMtastic Editor by:

Choosing the View » Area command from the main menus.
Clicking the button, on the CAMtastic Standard toolbar.
Right-clicking within the workspace and choosing the Area command from the context menu.

Use

After launching the command, the cursor will change to a crosshair and you will be prompted to select the first corner of the zoom window. Position the cursor and click to anchor this corner. You will then be prompted to select the second corner. Move the cursor to size the zoom area and click to anchor this second corner. The display will change, with the specified area zoomed and centered in the main design window.

Continue redefining the display area in the main design window, or press Esc to exit.