HideConnections

Applied Parameters: Hide=Net

Summary

This command is used to hide the connection lines with respect to a single net. Connection lines are the visual representation of the logical connectivity between net objects. Each of these lines, connecting one pin in a net to another pin in the net, is called a From To. The entire set of connections (From Tos) for a design is often referred to as the 'ratsnest'.

Access

This command can be accessed from the PCB Editor by:

• Choosing the View » Connections » Hide Net command from the main menus.
• Using the N keyboard shortcut to access a connections pop-up menu, then choosing the Hide Connections » Net command.

Use

After launching the command, the cursor will change to a cross-hair and you will be prompted to choose an electrical object or connection. Position the cursor over the net (or a pad connected to the net) you wish to hide and click, or press Enter. All connection lines for the chosen net will be hidden.

Continue hiding the connection lines of other nets, or right-click, or press Esc, to exit.

Tips

1. If you do not know the location of a pad on the net, or one of its connection lines, click in free space and a dialog will pop up, prompting for the net name. If you are unsure of the net name, type ? and click OK to launch the Nets Loaded dialog, which lists all loaded nets for the design. The connection lines for the net you choose in the dialog will be hidden when you click OK.

Applied Parameters: Hide=ComponentNets

Summary

This command is used to hide the connection lines with respect to all nets associated with a particular component. Connection lines are the visual representation of the logical connectivity between net objects. Each of these lines, connecting one pin in a net to another pin in the net, is called a From To. The entire set of connections (From Tos) for a design is often referred to as the 'ratsnest'.

Access

This command can be accessed from the PCB Editor by:

• Choosing the View » Connections » Hide Component Nets command from the main menus.
• Using the N keyboard shortcut to access a connections pop-up menu, then choosing the Hide Connections » On Component command.

Use

After launching the command, the cursor will change to a cross-hair and you will be prompted to choose a component. Position the cursor over the component whose associated nets you wish to hide and click, or press Enter. The connection lines for these nets will be hidden.

Continue hiding further nets associated with other components, or right-click, or press Esc, to exit.

Tips

1. If you do not know the location of a component, click in free space and a dialog will pop up, prompting for the component's designator. If you are unsure of the designator, type ? and click OK to launch the Components Placed dialog, which lists all components in the design. The connection lines for all nets associated to the component you choose in the dialog will be hidden when you click OK.
2. During component moves, all connection lines are automatically hidden. To toggle the display of these connection lines while moving a component, press the N key while in movement mode. When pressing the N key in movement mode, the Heads Up display between Show to Hide, depending on whether the component is shown or hidden.

Applied Parameters: Hide=All

Summary

With all connections showing, it can be difficult to see individual nets or connections, especially when routing a specific net. This command is used to hide all connection lines in the design. Connection lines are the visual representation of the logical connectivity between net objects. Each of these lines, connecting one pin in a net to another pin in the net, is called a From To. The entire set of connections (From Tos) for a design is often referred to as the 'ratsnest'.

Access

This command can be accessed from the PCB Editor by:

• Choosing the View » Connections » Hide All command from the main menus.
• Using the N keyboard shortcut to access a connections pop-up menu, then choosing the Hide Connections » All command.

Use

After launching the command, the entire ratsnest will be hidden.

Applied Parameters: Hide=Net|ContextObject=Net

Summary

This command is used to hide the connection lines with respect to the net under the cursor. Connection lines are the visual representation of the logical connectivity between net objects. Each of these lines, connecting one pin in a net to another pin in the net, is called a From To. The entire set of connections (From Tos) for a design is often referred to as the 'ratsnest'.

Access

This command is accessed from the PCB Editor by right-clicking over a net object and choosing the Net Actions » Hide Nets command from the context menu.

Use

After launching the command, all connection lines for the net will be hidden.

Tips

1. During component moves, all connection lines are automatically hidden. To toggle the display of these connection lines while moving a component, press the N key while in movement mode. When pressing the N key in movement mode, the Heads Up display between Show to Hide, depending on whether the component is shown or hidden.

Applied Parameters: Hide=ComponentNets|ContextObject=Component

Summary

This command is used to hide the connection lines with respect to all nets associated with the component under the cursor. Connection lines are the visual representation of the logical connectivity between net objects. Each of these lines, connecting one pin in a net to another pin in the net, is called a From To. The entire set of connections (From Tos) for a design is often referred to as the 'ratsnest'.

Access

This command is accessed from the PCB Editor by right-clicking over a component and choosing the Component Actions » Hide Nets command from the context menu.

Use

After launching the command, all connection lines for the nets associated with the component will be hidden.

Tips

1. During component moves, all connection lines are automatically hidden. To toggle the display of these connection lines while moving a component, press the N key while in movement mode. When pressing the N key in movement mode, the Heads Up display between Show to Hide, depending on whether the component is shown or hidden.