Skip to main content

Ver: Version: 18.0

21 20.2 20.1 20.0 19.1 19.0 18.1 18.0 17.1 17.0 16.1 16.0 15.1

Close

Search Search on Documentation

Altium Designer Documentation

Documentation

Altium Designer Documentation ... Command Reference TextEdit Commands

DeleteToEndOfLine

Created: July 27, 2015 | Updated: April 11, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: TextEdit Commands

The following pre-packaged resource, derived from this base command, is available:

Delete to End of Line

Applied Parameters: None

Summary

This command is used to delete all characters from the current cursor position to the end of the current line.

Access

Access to this command is made using the Ctrl+Q+Y keyboard shortcut only.

Use

Simply position the text cursor at the required position in the line and launch the command. All characters from the cursor to the end of the current line will be deleted. The cursor will effectively remain at its original location.

Tips

The deleted characters can be restored using the Undo command.

Note

This documentation page contains information for an older version of Altium Designer. The latest, online documentation can be found here.