PadYSize_MidLayer1

Created: September 03, 2015 | Updated: August 18, 2021 | Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: PCB Query Functions - Fields

Summary

Returns pad objects whose Y Size (Mid Layer 1) property complies with the Query.

Syntax

PadYSize_MidLayer1 : Number

Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).

A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:

AsMils(PadYSize_MidLayer1) : Number – to specify a size in mil.
AsMM(PadYSize_MidLayer1) : Number – to specify a size in mm.

Example Usage

PadYSize_MidLayer1 = 100
Returns all pad objects whose Y Size (Mid Layer 1) property is equal to 100 current measurement units.

PadYSize_MidLayer1 >= 4.064
Returns all pad objects whose Y Size (Mid Layer 1) property is greater than, or equal to, 4.064 current measurement units.

AsMils(PadYSize_MidLayer1) > 80
Returns all pad objects whose Y Size (Mid Layer 1) property is greater than 80mil.

AsMM(PadYSize_MidLayer1) Between 1.524 And 3.81
Returns all pad objects whose Y Size (Mid Layer 1) property is greater than or equal to 1.524mm and less than or equal to 3.81mm.

PadYSize_MidLayer1 <> 50
Returns all pad objects whose Y Size (Mid Layer 1) property is not equal to 50 current measurement units.

Tips

For simple pads (with Stack Mode set to Simple) the Y Size (Mid Layer 1) property will be the same as the Y Size (All Layers) property, since the specified size is used for all signal layers.
The Y Size (Mid Layer 1) property is only defined for pad objects.