Skip to main content

Ver: Version: 17.0

21 20.2 20.1 20.0 19.1 19.0 18.1 18.0 17.1 17.0 16.1 16.0 15.1

Close

Search Search on Documentation

Altium Designer Documentation

Documentation

Altium Designer Documentation ... Command Reference TextEdit Commands

MoveCursorUp

Created: July 27, 2015 | Updated: April 11, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: TextEdit Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None

Summary

This command enables you to use the keyboard to move the text cursor upwards in the current document, one line at a time.

Access

Access to this command is made using the Up Arrow keyboard shortcut only.

Use

Launch the command to move the text cursor up by one line. Use the command repeatedly to move the text cursor upwards through the current document, one line at a time.

Note

This documentation page contains information for an older version of Altium Designer. The latest, online documentation can be found here.