Skip to main content

Ver: Version: 17.0

21 20.2 20.1 20.0 19.1 19.0 18.1 18.0 17.1 17.0 16.1 16.0 15.1

Close

Search Search on Documentation

Altium Designer Documentation

Documentation

Altium Designer Documentation ... Command Reference VersionControl Commands

ShowAutobackups

Created: July 27, 2015 | Updated: April 11, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1

Parent page: VersionControl Commands

The following pre-packaged resource, derived from this base command, is available:

Show Autobackups

Applied Parameters: None

Summary

This command is used to show the automatic backup history in the Storage Manager panel.

Access

This command can be accessed in the following ways:

In the Storage Manager panel, select a document in the Timeline region (Combined View), right-click, and select Show Autobackups from the context menu.
In the Storage Manager panel, select a document in the Local History region (Classic View), right-click, and select Show Autobackups from the context menu.

Use

After running this command, the automatic backup history is displayed.

Note

This documentation page contains information for an older version of Altium Designer. The latest, online documentation can be found here.