Skip to main content

Ver: Version: 16.0

21 20.2 20.1 20.0 19.1 19.0 18.1 18.0 17.1 17.0 16.1 16.0 15.1

Close

Search Search on Documentation

Altium Designer Documentation

Documentation

Altium Designer Documentation ... Command Reference Sch Commands

LastComponentLibraryEditor

Created: July 27, 2015 | Updated: April 11, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1

Parent page: Schematic Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None

Summary

This command is used to quickly jump to, and make active, the last component in the current library document.

Access

This command can be accessed from the Schematic Library Editor by:

Choosing the Tools » Goto » Last Component command from the main menus.
Right-clicking in the workspace and choosing the Tools » Last Component command from the context menu.

Use

After launching the command, the last component in the Components list in the SCH Library panel will be highlighted, and the component will be displayed as the active component in the main design window.

Note

This documentation page contains information for an older version of Altium Designer. The latest, online documentation can be found here.