Zoom Value

Created: February 05, 2016 | Updated: June 19, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1

The Zoom Value dialog.

Summary

This dialog is used to change the magnification of the display of the current document, by a specified value.

Access

This dialog can be accessed in the following ways:

From the toolbar, select Help » Popups » Zoom » Select.
In the PCB or PCBLIB Editor, click on an open area in the workspace. Press the Z key and choose Select from the context menu.

Options/Controls

Enter the required zoom level (magnification) required and click OK. The view of the main design window will update in accordance with the chosen magnification.