Pad_CornerRadius_MidLayer1

Created: September 03, 2015 | Updated: August 11, 2021 | Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: PCB Query Functions - Fields

Summary

Returns pad objects whose Pad Corner Radius (%) (Mid Layer 1) property complies with the Query. This includes:

Syntax

Pad_CornerRadius_MidLayer1 = CornerRadius_String Pad_CornerRadius_MidLayer1 <> CornerRadius_String

CornerRadius_String specifies the corner radius, expressed as a percentage.

Example Usage

Pad_CornerRadius_MidLayer1 = '50%'
Returns all pad objects whose Pad Corner Radius (%) (Mid Layer 1) property equals 50%.

Pad_CornerRadius_MidLayer1 <> '30%'
Returns all objects except for pad objects whose Pad Corner Radius (%) (Mid Layer 1) property equals 30%.

Tips

The single quote characters (') at the start and end of CornerRadius_String are mandatory.
For simple pads (with Stack Mode set to Simple) the Pad Corner Radius (%) (Mid Layer 1) property will be the same as the Pad Corner Radius (%) (All Layers) property, since the specified Corner Radius is used for all signal layers.
The Pad Corner Radius (%) (Mid Layer 1) property is only defined for pad objects.